Maschinen

3D-Scanner - CNC-Fräse - Laser - Reflow Oven - 3DPrinter (Prusa XL, Prusa Mk3S, Prusa Mini) - Vinylplotter - Schweißinverter -Tischbohrmaschine - Drehbank - Ultraschallreiniger - Nähmaschinen

Language:	English

CNC-Fräse

Eigentümer:	Metalab, some Parts of the machine are held private
Status:	Aktiv
Erfordert Einschulung:	Ja
Erfordert Authentisierung:	Nein
Kostet:
Hilfsbereite:	CNC Mailing List

WARNING: Do not use this machine if you have not had an official introduction to the workflow of this specific machine. It is quite complex and working with this device can easily result in a visit to the hospital...

CNC aka the Geil-o-Mat

What is it? It is a CNC (Computerized Numeric Control) Machine, which is located in the Heavy Machinery Department of the Metalab.

Technical Outline:

Spindle speed: 6000 - 24000 min^-1
Tool Size: 1mm up to 8mm shank, also 1/8" shanks
Maximum step speed: 2000 mm*min^-1 (3600mm*min^-1 for G0, z-axis max 1200mm*min^-1)
Maximum Workspace Dimension: about 725mm * 395mm (X*Y). The height depends on your workpiece, millhead and where do you fix it!
Maximum Workpiece Dimension: about 510mm in width, the length is up to a few meters when the cage is opened. The T-slot plate is ~104.9x48cm.
Cooling: Air (or liquids by hand)
Clamping: Various - depends on your job
Software: Runs via LinuxCNC (an Open Source CNC Software)
Materials: wood, PCBs, plastics, (millable) aluminium (with precaution!); NO steel (never ever)!

For projects results of this machine, please visit http://geilomat.soup.io/

Ask on our Mailinglist for help: https://lists.metalab.at/mailman/listinfo/cnc

Take also a peek into the LinuxCNC Wiki! There are really good articles about CNC Stuff too!

Standard Procedure

Before you can start milling

Using the CNC is not as straight forward as using the Lazzzor. From the handling, it can be compared with a 3D-Printer but there are still more steps involved.

To work with the CNC machine you need the following things ready:

G-Code
Cutters suiteable for your material
Material
A method to fixate the material in the machine
A method to measure workpiece coordinates and save them in LinuxCNC

While the Material and Cutters are usually not the biggest problem (see CNC and Benutzer:Fbr/WhereToGet for more information), G-Code generation is probably the hardest part. Also fixating the material can be challaging, as well as measuring the workpiece coordinates.

The easiest way to get G-Code is using CAM software. Such a software can "convert" CAD parts into G-Code. There are some OpenSource projects but most of them are not really powerful and only work for simple pieces. See also CNC#CAM for a list of Tools. Expensive CAD software has also powerful CAM modules, but they are in the range of 10k€ or more.

Fiaxting plates and rectangular workpieces isn't a problem, as we have a set of clamping claws and a T-slot table. For other pieces it might be a good idea to build a fixature first.

Measuring the workpiece isn't too hard either, if working with non-complex geometries.

Ask for help, if you need to clamp or measure an complex part! There is always some trick you can use.

Here is a good example for the workflow of CNC machining (and some more explanations) using Autodesk Fusion and Mach3/4 (quite similar to LinuxCNC): CNC Dummies For Routers & CNC Basics 2

Start Up

Warning Sign which is now implemented in the geilomat

There are some important steps to take, otherwise you can destroy everything - even the earth... If you don't switch on the things in this particular order it can happen that the machine does things out of nowhere e.g. moves or turns on the spindle!!!

Start CNC PC (do not turn on the G4 (The "G4 Case" stepper control thing), neither the VFD)
Start LinuxCNC, make sure the X-Box controller is plugged in, otherwise starting the LinuxCNC doesn't work
1. If you are using the T-notch plate, choose the Shortcut "Geil-O-Mat starten (T-Nut Platten, Z Limit 107mm)"
2. Otherwise choose "Geil-O-Mat starten (Z Limit 112.5mm)" which has extra 5.5mm Z-Axis travelling distance
Press the emergency stop at the machine frame (if not already pressed)
Power on the Stepper Driver (The G4 Case)
Plug in the Variable Frequency Drive (VFD)
1. Wait until the VFD is started up
2. Check if 100.0 Hz is set on the screen of the VFD
3. Otherwise rotate the rotary encoder that it is 100.0Hz
Now release emergency stop
Power on the Machine inside LinuxCNC
Move near Homing position
Start Homing Sequence ("Referenzfahrt")
Warm up the Spindle as described here in the wiki

Now the machine is ready to use.

For milling the spindle needs to be warm. The manual says that you should first let the spindle run for about 1 minute on 6000rpm, then increment by 6000rpm for 1 minute until you reached your destination speed. If the spindle wasn't used for longer than one week, you should double that time. So better is to let it run for two minutes on each speed.

There is a sample code in the GCode Section

Power Down

Move Machine in a position where you can easily clean it and remove millheads. The back right corner is a good choice!
Press Emergency Stop
Plug out VFD
Shut down Stepper Drivers
Exit LinuxCNC
Power off PC
After seeing "System Halted" press the Power Button of the PC
Remove Cutter and Clamp
Clean the machine-bed and everything else.

Machines and Things around the CNC

CNC PC: a Linux machine running the LinuxCNC Software and sends out commands via Parallel Port
G4: a old Apple G4 Case holding the stepper drivers and breakout board
Stepper Driver: Each stepper driver controls one stepper. There are 5 Stepper Driver in the G4: 2x X, 1x Y, 1x Z, 1x A (currently unused)
Breakout Board: Is used to "convert" the parallel commands to a different protocol that the stepper drivers are using. It controls also the spindle speed by sending an appropriate signal to the VFD
VFD (Variable Frequency Drive): This Box controls the Spindle. It has a output of 100 to 400Hz on 3 Phases and gets controlled by the Breakout Board.

VFD, controls the spindle speed
Stepper Driver Power Switch
Emergency Switch
CNC PC (in the front) and "G4" Stepper Driver (back)
Our set of collets for the Spindle
Power Consumption Meter at the output of the VFD
The Spindle
A Stepper Motor
The Stepper Drivers inside the "G4"
The Breakout Board converts parallel port to stepper drivers and VFD
You can add more emergency switches to this board
The Homing switches are used to give the machine a home position
Aluminium profiles are used as a side lay, for easy and repeatable positioning of the workpiece

Wie Spanne ich ein Werkzeug richtig ein

Wahl der richtigen Spannzange

Der Spannzangensatz ist zwischen 1mm und 7mm auf 0.5mm gestuft. Stimmt der Nenndurchmesser des Schafts mit dem Nenndurchmesser ein Zange überein, dann nimmt man die. Für Zwischenwerte die nächst größere Spannzange. Für 1/8-Zoll-Schäfte sind eigene Zangen vorhanden, für 1/4-Zoll leider nur die 6,5er-Zange Der kleinste Schaft, den ich mich in die 1mm-Zange spannen traue ist 0.7mm

Überwurfmutter

Wie auch bei der Kress-Spannzange ist als erstes die Spannzange in die Spindelmutter (Überwurfmutter) einzurasten. Die Zange sitzt richtig, wenn ihr Aussenende (nahezu) plan zur Mutter ist (auch nach dem Aufschrauben auf die Spindel prüfen, bevor man fest anzieht). (Bei genauer Betrachtung der Mutter fällt auf, dass der Bund, der in den Einstich der Spannzange einrastet exzentrisch zur Achse der Mutter ist. Das ist Absicht und erleichtert das Einrasten.)

Einbau des Werkzeuges

Das Werkzeug in die Spannzange (in der Mutter) einstecken Manche Fräser haben eine Flachstelle am Schaft. Die Enden der Spannzange sollten nicht in diesem Loch zu liegen kommen, da sonst die Zange asymmetrisch spannt und eventuell beschädigt wird. (Das innere Ende Spannfläche muss nicht das Ende des gesamten Körpers sein, manche Zangen sind abgesetzt) Bis 7mm ist es möglich, den Werkzeugschaft durch die Zange in die Spindel zu stecken. Bei der 8er-Zange geht das nicht!

Montage des Werkzeuges

Die Zange mit dem Werkzeug in die Spindel einsetzen und Mutter aufschrauben Da die Zange im offenen Zustand, speziell bei Bohrern, die etwas kleineren Schaftdurchmesser haben, das Werkzeug nicht halten kann, folgen die Werkzeuge gern der Schwerkraft. Man braucht einen 13er-Schlüssel für die Spindelachse, einen 17er für die Mutter und eine 3. Hand, um das Schneidwerkzeug zu halten. Oder doch nicht? Wenn man die Y-Achse und Z-Achse geschickt positioniert, kann man den 13er auf die Schleppkette auflegen und gegen das Portal lehnen. Alternativ kann man einen Holzblock unter das Werkzeug stellen. Es schadet generell nicht, bei offenem Arbeitsraum-Boden (so wie jetzt wo ich oft werkel) eine Holzplatte unter der Spindel am Boden aufzulegen, falls das Werkzeug doch "abpascht" (beim Ausspannen!).

die Mutter anziehen

Wie oben erwähnt jetzt noch mal den richtigen Sitz der Zange prüfen! Das Gewinde der Mechatron-Spindel ist sehr fein, daher erzeugt es schon bei mäßigem Drehmoment recht hohe Axialkräfte, die letztendlich die Zange schließen. Das erzeugt Radialkräft auf den Werkzeugschaft, die über Reibung das Werkzeug halten. Wie wir alle wissen, ist die Flächenpressung, die ein Werkstoff erträgt begrenzt und gleich Kraft durch Fläche. Die Pressfläche ist bei kleinen Zangen viel kleiner als bei großen, daher speziell diese mit Gefühl anziehen. Wenn alle Spiele aus der Anordnung verschwunden sind, gibt es einen Punkt, wo das Anziehen "hart" wird. Über diesen Punkt hinaus sollte man nicht gehen.

Aus- und Einbau der T-Nut Platten

Sollte jemand die T-Nutplatten aus arbeitstechnischen Gründen entfernen müssen, dann bitte folgendes beachten:

a) hinter der hintersten T-Nutplatte sind auf dem Rahmen links und rechts jeweils ein Nutenstein mit Wurmschraube und einer Zylinderkopfschraube fix montiert. Beim Wiedereinbau die erste T-Nutplatten vorsichtig an diese Köpfe anschieben. die folgenden beinde jeweils spaltfrei anschschließen. Bitte die Platten nicht verdrehen. Aktuell ist auf der linken Seite duch die Bohrungsmittelpunkte ein schwarzer Strich gehend.

b) Damit die T-Nutplatten lange leben und eine glatte Oberfläche behalten, bitte bei Durchfräsungen bzw. Durchbohrungen durch Euer Werkstück eine entsprechende Opferplatte dawischen einspannen. Falls jemand nicht genau wissen sollte, was damit gemeint ist bzw. wie so etwas eingespannt werden soll, bitte unbedingt vorher auf der CNC-Mailingliste nachfragen.

c) sollte als Opferplatte irgendein dickeres Material (MDF, Kunststoff etc.) verwendet werden um sein Werstück mit Spax-Schrauben niederzuspannen, dann bitte die Schraubenlänge so wählen, daß die Schraube die T-Nutplatte NICHT erreicht !!! Daher bitte lieber vorher 10 Sekunden nachdenken, sonst erreicht Euch die Strafe der Werkstättengeister.

mutwilliges Hirnabschalten ---> Ersatz für Schaden (Material + Zeitaufwand) + 1 Jahr HM + WEL wöchentlich aufräumen
nicht mutwilliges Hirnabschalten --> Ersatz für Schaden (Material + Zeitaufwand) und 1 Jahr HM wöchentlich aufräumen

GCode

See also this Page for more GCodes: CNC/GCode‎

Example Gcode Header for Geilomat:

; A secicolon starts a comment
(Lines inside brackets are comments too)
G21      ; use mm
G90      ; absolute coordinates
G92.1    ; cancel offset coordinate system and set values to zero
G54      ; use G54 coordinate system
G40      ; turn radius compensation off
G17      ; choose x,y plane
G80      ; Cancel Motion Modes (e.g. active canned cycles)
G94      ; movement speed is in units per minute (hence mm/min)
G49      ; turn cutter legth compensation off
; It is always a good idea to go to a known safe location to run the warmup
G0 Z10   ; Go to saftyplane, usually you define the highest part of your workpiece as Z=0
; Spindle Warmup Sequence
M3       ; turn on spindle
S6000    ; 6000 min-1 spindle speed
G4 P120  ; wait 2 minutes until spindle is warm
S12000   ; add another 6000min-1
G4 P120  ; again two minute wait
; repeat steps above (S and G4) until target speed is reached

F500     ; 500mm/minutes movement speed

; your program starts here... now you can do things like
G0 X0 Y0 ; go to your 0,0 point rapidly
G4 P0    ; Dwell for no time, to force linuxcnc to be on this point exactly
G1 Z0    ; go to Z0 with 500mm/min (as set with F command)

; the tail
G0 Z10   ; retract from workplane - safty plane
M30      ; end program

Parameters for typical jobs

Milling aluminium - the right parameters are key to sucess.

Please note that these Values are produced under different circumstances - like how many "Schneiden" a mill has or what kind of mill you are using! Please use also "Drehzahlrechner" for looking up proper values.

Please be aware that, like with the lasercutter, not every material can be cut and for each material you have certain parameters. These parameters are in the first place a result of the tool you use but also depends on chemical and mechanical compound of the material you need to cut. For example there are a lot of aluminium types, like AlMgSiPb or AlCuBiPb which is very good for milling and also pure Al99,5 which is very very bad for milling!!! This counts for all types of material, also for wood! e.g. MDF has very different cutting parameters than birch wood...

Material	Head Diameter mm	Cutting Depth mm (a_p)	Sidewards depth in % of diameter (a_e)	Spindle Speed	Feed Rate mm/min	Comment
MDF	6mm Z2	3	100%	18000	Feed 2000, Plunge 300	Absaugen! Das Zeug ist ziemlich fein und nicht gut für die Lunge... --Reox (Diskussion) 11:46, 9. Jan. 2016 (CET)
Wood	3	5	50%	12000-14000	>300	guessed proposal
Wood	0.8	4	100%	12000-14000	~250	guessed proposal
Wood	3	0.8	50%	12000	600	looked good, material was plywood 8mm
Wood (Leimholz Fichte)	6mmZ3	2	100%	23000	1000	Works fine, also tested 0.5, 1.0 and 1.5mm
Wood (Leimholz Fichte)	6mmZ3	6	1mm	23000	1000	Für Kanten, Stege auf der Holzplatte brechen aus (Achtung)
Aluminium	6	0.25	6mm	10000	1100	Vierschneider, schleppender Schnitt - no external cooling
Aluminium	6	0.25	6mm	10000	650	Zweischneider, schleppend und ziehender schnitt - no external cooling
Aluminium	4	0.25	6mm	14000	850	Dreischneider, Wassergekühlt, leicht raue Oberfläche
Brass (Messing)	2	0.25	50%	24000	960	Zweischneider - no external cooling
PCB engrave	0.1-0.3 30deg	0.3	0.035	12000	1000	tested in epoxy-pcb
PCB drill	0.9	-2.5	0.5	14000	400	tested in epoxy-pcb
PCB milling	0.5	0.035 (isolate) 0.25 (mill)	100%	22000	400	tested in FR4
Plexiglass Front door engrave	0.1 30deg?	1		10000	20	Plunge 20, toolsize cambam 0.3
Plexiglass egg	1.5 30deg?	0.5		14000	100	Plunge 30, toolsize cambam 1.5 : 4mm thick plexiglass 400x300
Plexiglas Portrait	0.1 30deg?	4		10000	?	0.3mm raster, Custom tool to convert from image to gcode
Acryl	6	0.5	5mm	6240	1400	Zweischneider, no external cooling - there are two types of Acryl: XT and GS. Use GS for Milling! Soapy water should be fine for cooling. Others report "Hirschtalg" works even better.

Warning

Do not use a too low feed-rate!! The cutting region of the milling head is microscopically round. If the "Spanbreite", the thickness of the removed material, is lower that this radius, most material is compressed and only cut if the compression force is to large. This results in dramatic friction and hence only heats up the milling head. The thought "Oh, the cutter is getting too hot, I can see burning marks in the side of the wood, I have to reduce the movement speed" is deadly!!! You can decrease the spindle speed, and increase the movement speed.

The Heat produced while cutting depends on the friction. A second part is proportional to the volume of material that is removed. Half the milling depth, half the heating! 25% sidewards instead of 50% sidewards cutting=half the heating.

Mill heads can break if the sidewards force is too large. So for tiny things, the feed rate together with the spindle speed and the cutting depth should be reduced.

Pocketing plexiglass

Choose engraving bit according to pocket size.
Be careful with CutIncrement (1mm is ok).
Be aware that plexiglass melts, so it's important to use cooling.
For bigger pocket operations, the vacuum cleaner has a certain cooling effect.
Air pressure and water cooling was necessary for the front door window engraving.

Cutting GFK (glasfaserverstärkter Kunststoff)

(Acquirable at http://www.der-schweighofer.at/artikel/77271/gfk_platte_300x135x1.5mm)

The following values work fine for cutting 1,5mm thick GFK.

Plunge Feed-rate: 100
Cut Feed-rate: 1500
Depth Increment: 0,8mm
Feed override: 75%

Aluminium

Maximum Millheadsize should be 4mm on our Machine! We sucessfully tested a_p = 0.25mm with 6mm head - with and without cooling (cooling done by isopropanol)

Spanabfuhr is quite a problem and our machine is not as stiff as we would like to have it for milling aluminium. so larger a_p would not work because the millhead will be bend to much.

Better use smaller diameter of cutter and higher spindle speed + feed rate.

MDF

MDF is a very nice working material. It is quite stable and can be easily milled. Also varnish looks great on it.

Using a wrong milling strategy, MDF tend to frezzle
The same thing, just using a different strategy, almost no frezzling (just at the 3mm pocket in the center)

But milling MDF has some pitfalls:

Mill the depest holes first. If you remove the hard cover of the MDF plate, the internal structure will not hold very good...
MDF tends to frezzle, if the facings are removed. Reportedly, a very sharp wood plunge mill will reduce the amout of frezzle, use one with 15 degree of spiral angle or less
The dust of MDF is toxic. Use a vacuum (and respirator)!
Do not use to slow feed rate! MDF will burn easily.

24000 rpms are probably better, but at this speed the spindle makes a lot of noise. So i decided to use 18000 rpm, which worked quite well. Probably the feedrate could be higher with 24k, but the machine is already in the "orange" zone with 2000 mm/min.

Cutting Speed

or in German "Schnittgeschwindigkeit" is depended on workpiece material, cutter material, cooling, method of milling and many others. The values listed below are just reference values! For a specific project you need to find out your parameters by reading datasheets or even test cuts in the material. If you need to do test cuts, start with the lowest possible value. But do not start to low because the "Spanbreite" needs to be larger than the blade edge radius.

Material	Cutter	Cooling	Cutting Speed $v_{c}[{\frac {\text{m}}{\text{min}}}]$	Feed Rate per Tooth $f_{z}[{\frac {\text{mm}}{\text{min}}}]$	Comment
Wood	VHM	No	up to 3000	???	Tested with $n=24000,z=2,d=6,v_{f}=3000$
Aluminium (9-13% Si)	VHM		300	0.06	From "Praxis der Zerspantechnik"

A rule of thumb is the following: The lower the Youngs modulus (E-Module) of a material, the sharper the tools must be, a more rigid setup is required, heavy feeds and slow speeds produce better results and abundant cooling is required. This is due to the yielding of the material during cutting. A very stiff material will not yield under the cutting force. A good example is the difference between polymeres and aluminium. Polymeres have low E-Modules (in the range of a few GPa) where aluminium has a E-Module of 70GPa. When cutting polymeres, the main problems are melting and smearing of the material, when using the same parameters as for aluminium.

From	Variable	Description	Beschreibung	Unit	Formular
milling cutter	$d$	Cutter diameter	Fräserdurchmesser	${\text{mm}}$
milling cutter	$z$	Number of Teeth	Anzahl der Schneiden
material specific	$f_{z}$	Feed per Teeth	Vorschub pro Schneide	${\text{mm}}$
material specific	$v_{c}$	Cutting Speed	Schnittgeschwindigkeit	${\frac {\text{m}}{\text{min}}}$
calculated	$v_{f}$	Feed Rate Forward	Vorschub	${\frac {\text{mm}}{\text{min}}}$	$v_{f}=n\cdot f_{z}\cdot z$
calculated	$n$	Revolutions	Umdrehungsgeschwindigkeit	${\frac {\text{1}}{\text{min}}}$	$n={\frac {v_{c}\cdot 1000}{\pi \cdot d}}$
defined by process and maximum load of machine	$a_{p}$	Infeed	Tiefenzustellung	${\text{mm}}$
defined by process and maximum load of machine	$a_{e}$	Sidewards Feed	Seitenzustellung	${\text{mm}}$
for time considerations	$Q$	Material Removal Rate	Zeitspanvolumen	${\frac {{\text{cm}}^{3}}{\text{min}}}$	$Q=a_{e}\cdot a_{p}\cdot v_{f}\cdot {\frac {1}{1000}}$

These values are connected to each other. There are two main formulars to calculate $n$ and $v_{f}$ . To have cutting speed in m/min instead of mm/min you need to divide by 1000. A third formular gives you an estimation how much cm³ you can remove per minute, called $Q$ .

Typically you choose a specific milling cutter for the job and lookup the values for the material. The process parameter are bound by the maximum load the machine can handle (See for example Why can't I mill steel in the CNC?) and of course by the workpiece you want to produce.

The cutting speed in the datasheet of a cutter is often calculated for a service time ("Standzeit") of 1 hour. That means if you mill with the exact parameters that are posted in the datasheet, the cutter will be unuseable after about one hour.

How to

CamBam Mini HowTo

Werte die man bei CamBam beim erstellen eines 2.5D oder Pocket Operation beachten muss

Sehr wichtige Parameter

CutIncrement - Wie tief geht die fraese in einem schritt
TargetDepth - Wie tief soll er insgesammt gehen. Die operation wird dann in TargetDepth/cutIncrement unterschritte zerlegt. ACHTUNG dieser wert muss negativ sein damit die fraese rein fraest.
CutFeedrate Wie schnell wird horizontal gefraest (mm/sec)
PlungeFeedrate Wie schnell wird in das Material hineingetaucht (mm/sec)
ToolDiameter Durchmesser des Fraeskopfes damit CamBam die pfade so berechnen kann dass nach dem fraesen die gewuenschte form entsteht

Weitere Parameter

InsideOutside Falls man die Outline verkehrt herum geyeichnet hat kann man mit dieser option innen und aussen umdrehen (einfach mal ausprobieren)

CNC - Software Infos und so..
PCB_CNC Use the CNC to create PCBs
Geil-o-mat/History History of the CNC
Geil-o-mat/Future Future of the CNC
Benutzer:Reox/CNC, Benutzer:Chrysn/Flausch-o-mat User Notes

Subpages:

CNC-Fräse/Technical

Formeln zum Berechnen von Zustellung, Umdrehungsgeschwindigkeit usw.

Technical Details

See this other Page for even more technical things: CNC Mill Technical Stuff

A CNC mill like the dear Geil-O-Mat has three axis that can be moved independently. A spindle with a mill cutter typically removes material.

Some pink work in progress...

Each axis is driven by one (Y and Z) or two (X) stepper motors. Basically, theses motors can only rotate in 1.8 degree steps, and hence no secondary encoder is needed for the machine knowing its current location. By a trick called "microstepping", currently the resolution is increased to 1/8 of 1.8 degrees. As the stepper leads in to a "Zwillings-Trapezgewindespindel", the rotation is transformed into linear motion, one revolution= 6mm. Warning: If there is too much force for the motor to move one step, it skips the step, typically failing also in subsequent movements, resulting in an ugly noise, and shift in the positioning.

The motors are connected to a driver device, which sits on top of the whole machine. It creates the strong currents for the stepper drivers, out of signals from the PCs parallel port.

Hence, the computer has to send signals telling which axis should move one step forward or backward at a given instance. This can/is done by a software called "LinuxCNC". It is open source, and the thread doing this parallel port communications is using the patched real time Linux-kernel.

There are some GUIs for LinuxCNC, the most relevant is "AXIS", which graphically displays the current machine position, the paths it should travel the track history, and further stuff. Also manual movement can be performed.

The language to specify the movement of the machine is called "GCODE". Some of its statements are starting with G01,or G00, hence the name. A simple Gcode can look like this:

; i am a comment
F100; move with 100mm/min while cutting
G0 Z10; fast move to Z-coordinate 10
G1 Z0; drill down until Z=0 with the speed given by the Feedrate
G1 X10; move to the new location X10 while cutting
G0 Z10; and back up with large speed.
M30; end program

One can do a lot of things, e.g. have variables (#1=10), and do loops , evaluate mathematical expressions (G1 Z[#1*2] ). So basically, real hackers write gcode by hand, while Chuck Norris sends movement commands to the steppers. However, as we are all lacy, and things can get quite complicated, there exists software to convert 3d/2d CAD files, grayscale depthmap images, 3d-stl objects and other things into Gode. This is often called "CAM"-Software.

If you have a 2d-cad file (e.g. dxf) and specify depths for some areas that should be milled away, one speaks of 2.5D-CAM. This is performed e.g. by CamBam, or Camexpert.

The biggest trouble is the radius compensation of the milling heads. You always have to cut on a path half a diameter outside of the actual position. For this, there are various workflows. In Gcode, one can tell specify if one wants to cut left, right or directly on the actual path. This is called cutter radius compensations. Its a pain in the ass. Hence, often one uses no such thing, but either draws directly the offsetted lines in CAD, or has some software like cambam, which does this compensation and outputs already compensated "paths". The drawback of both methods is that one can not change the diameter of the cutter without recreating the gcode.

In the Gcode compensation, a "tool table" can be used. Each cutter is index by a number, and in the table the diameters and other things are specified. The other variant is to define the radius compensation directly. For our CNC machine a tool table is not useful, but on machines which have automated tool changer it can store all offsets and positions in the tool changer.

The current machine's state is given by a coordinate triple, and some states (emergency swich, spindle speed, ...). The machine coordinate system is defined by the now automated homing routine. Thereafter, one can move the machine to a location, and "touch off", giving explicit coordinates for this location. Thereby the working coordinate system is defined. This is also the system displayed in Axis, However, in the background, the machine still works in the home-coordinate system for checking its movement limits. Clever!

CNC-Fräse