Pick&Place: Unterschied zwischen den Versionen

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
(Machine template added; started basic structure)
K (→‎Fiducials: Example picture of fiducial added)
 
(Eine dazwischenliegende Version desselben Benutzers wird nicht angezeigt)
Zeile 19: Zeile 19:
  
 
= PCB requirements =
 
= PCB requirements =
Not all PCBs are created equal. Some PCBs are more suited to component placement with this machine. The following  
+
Not all PCBs are created equal. Some PCBs are more suited to component placement with this machine. The following information should help you to design PCBs suitable for automated placement of components.
 
=== Fiducials ===
 
=== Fiducials ===
 +
[[Datei:Round_fiducial_on_pcb.jpg|120px|thumb|left|Fiducial on a PCB]]
 
Fiducials are alignemt marks on PCBs. The standard for these is a 1mm copper circle surrounded by a 2mm soldermask opening. They are used for alignng your PCB via optical detection. For successfull operation there should be at least '''three''', better '''four''' which are places in the corners of your PCB to get the best accuracy for the placement of components.
 
Fiducials are alignemt marks on PCBs. The standard for these is a 1mm copper circle surrounded by a 2mm soldermask opening. They are used for alignng your PCB via optical detection. For successfull operation there should be at least '''three''', better '''four''' which are places in the corners of your PCB to get the best accuracy for the placement of components.
  

Aktuelle Version vom 23. Juli 2020, 20:40 Uhr

Language: English
Subpages:
Pick&Place hat keine Unterseiten.


Pick&Place
Liteplacer.jpg
Eigentümer: Metalab
Status: sort of working, training in progress
Erfordert Einschulung:
Erfordert Authentisierung:
Hilfsbereite: ripper, ...


Pick & Place Machine

Liteplacer Introduction Video

Metalab owns a Pick & Place machine which is mounted in the window aisle of the electronics room in the Whateverlab. This machine can be used to place SMT components on PCBs automatically. You can find a lot of information about the machne on the projects website.
The machine runs via OpenPnP, an Open Source SMT pick and place software.

PCB requirements

Not all PCBs are created equal. Some PCBs are more suited to component placement with this machine. The following information should help you to design PCBs suitable for automated placement of components.

Fiducials

Fiducial on a PCB

Fiducials are alignemt marks on PCBs. The standard for these is a 1mm copper circle surrounded by a 2mm soldermask opening. They are used for alignng your PCB via optical detection. For successfull operation there should be at least three, better four which are places in the corners of your PCB to get the best accuracy for the placement of components.

Size

TBD

Standard operation procedure

The machine is best operated by followind these instructions:

  • TBD

Financial

Metalab will be buying the DIY pick&place machine shown in the video behind the link above for deployment in the Electronics Lab. Half of the machines price will be covered by donations. If you think that buying the machine is a good idea and/or want to contribute, here's the list to financially support it:

Contributors
Name Amount Paid
anlumo € 50
redplanet € 42
consti € 100
Zwax € 50
ripper € 100
Herbert € 67
datacop € 75
chrysn € 75
pk € 49
Willi € 50
OE1OMA € 50
Your name here € 1.000.000
Total € 708 / 700 € 708 / 708