GoCNC: Unterschied zwischen den Versionen

aus Metalab, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Wechseln zu: Navigation, Suche
(+bunt, Herstellerlink, History)
Zeile 2: Zeile 2:
 
{{Languages|en}}
 
{{Languages|en}}
 
{{Machine
 
{{Machine
 +
|image=GoCNC A4Advanced.jpg
 
|owner=Metalab
 
|owner=Metalab
 
|status=Aktiv
 
|status=Aktiv
Zeile 10: Zeile 11:
 
}}
 
}}
  
GoCNC is a small [[CNC-Fräse]] machine for milling in max A4 size.
+
GoCNC is a small [[CNC-Fräse]] machine for milling in max A4 size. <br /><small>It was [http://geilomat.soup.io/post/357365039/Thank-you-Christoph-S-for-donating-a donated by Christoph S.] in Oct. 2013.</small>
  
 
== Tech Specs ==
 
== Tech Specs ==
  
 +
* [http://gocnc.de/product_info.php?cPath=22&products_id=32&language=en&osCsid=0dccfe57673957c911a8047a827c84dd CNC Milling machine GoCNC Hobby A4 Advanced]
 
* Steppers are set to 1.5A, 8 Microsteps
 
* Steppers are set to 1.5A, 8 Microsteps
 
** It uses a Stepp2500a control board
 
** It uses a Stepp2500a control board
Zeile 21: Zeile 23:
 
* For use with Dremel or Proxxon Device as spindle
 
* For use with Dremel or Proxxon Device as spindle
 
* It uses M10 threaded rods, which are quite bad...  
 
* It uses M10 threaded rods, which are quite bad...  
 +
  
 
== Configuration ==
 
== Configuration ==
Zeile 31: Zeile 34:
 
== Profit ==
 
== Profit ==
  
It Plays Tetris!
+
It plays Tetris!
  
 
{{#ev:youtube|4MelMEhzIfM}}
 
{{#ev:youtube|4MelMEhzIfM}}

Version vom 1. November 2013, 16:26 Uhr

Language: English


GoCNC
GoCNC A4Advanced.jpg

Eigentümer:

Metalab

Status:

Aktiv

Erfordert Einschulung:

more or less

Erfordert Authentisierung:

NOPE

Kostet:

500€

Hilfsbereite:

contact cnc@lists.metalab.at


GoCNC is a small CNC-Fräse machine for milling in max A4 size.
It was donated by Christoph S. in Oct. 2013.

Tech Specs

  • CNC Milling machine GoCNC Hobby A4 Advanced
  • Steppers are set to 1.5A, 8 Microsteps
    • It uses a Stepp2500a control board
    • Steppers are Nanotec ST5918X1008-B 4.9V 1.0A
  • Maximum working Plane: X165, Y290, Z65
  • Maximum Speed: around 1000mm/min
  • For use with Dremel or Proxxon Device as spindle
  • It uses M10 threaded rods, which are quite bad...


Configuration

Currently the mill is working with the LinuxCNC Setup on the CNC PC. There is an option for a USB Device that does the realtime stuff in a FPGA but that only works with a Windows PC.

If you are familiar with the LinuxCNC Workflow on the Geil-o-Mat, you can use it as well as on the GoCNC with the difference that the Spindle is NOT automatically turned on and off because the Relais on the control board can not be attached to the spindle!!!

Profit

It plays Tetris!

(just to give you one example ;))