Prusa Mk3S
3D-Scanner - CNC-Fräse - Laser - Reflow Oven - 3DPrinter (Prusa XL, Prusa Mk3S, Prusa Mini) - Vinylplotter - Schweißinverter -Tischbohrmaschine - Drehbank - Ultraschallreiniger - Nähmaschinen
| Prusa Mk3S | |
| Eigentümer: | Metalab |
| Status: | Aktiv |
| Erfordert Einschulung: | nicht wirklich |
| Erfordert Authentisierung: | nein |
| Kostet: | gratis, aber eine Spende für Filament wäre nett :) |
| Hilfsbereite: | ripper, BadPractice, You? |
New printer in the house: Prusa i3 Mk3S (no MMU3 yet)
The Prusa was owned by BadPractice and now belongs to Metalab. It is available for everyone to use.
If you have no experience with 3D printing please ask for help and/or read instructions online.
Howto
- Official YouTube tutorial by the manufacturer
- Official manual by the manufacturer
- Flash new Firmware [1]
- Spare Parts: [2]
Using it
(PETG) Warnung/Warning
DE: Wenn ihr mit PETG Filament drucken wollt nutzt die raue Druckplatte ! Nutze NICHT (außer du WEIẞT was du tust) die glatte Druckplatte für PETG! Ansonsten wirst du die glatte Platte wahrscheinlich kaputt machen, weil sich die gedruckten Dinge nicht mehr lösen lassen! EN: If you want to print with PETG Filament use the textured print sheet ! Do NOT (except you KNOW what you do) use the smooth print sheet for PETG! You will destroy the smooth print sheet with a high chance, because it's hard to remove the printed thing from the print sheet! |
Do I need to visit a workshop to use it
No, but you need to reduce the fan speed to 40% on this 3D printer. If you do not know how to change this, ask for help or use the Prusa_Mini which works with standard profile settings.
Material costs
Printing at Metalab is free in general, however it would be appreciated to leave a donation if you print something that needs a lot of material.
technical details
| What | Facts | Comments |
|---|---|---|
| Build volume | 250 x 210 x 210 mm | - |
| Layer height | 0.05 - 0.35 mm | - |
| Filamentsensor | ✔ | - |
| Filament diameter | 1,75mm | - |
| Connectivity | USB, SD Card | - |
| Print sheets | magnetic, smooth and textured | smooth for PLA, textured is required for materials like PET-G because it can destroy smooth sheets |
| Nozzle diameter | 0,4mm |
What can i do to help
- general care for the printer (e.g. cleaning, lubrication of axes and leadscrews)
Multi color upgrade
At 2023-08-22_Jour_Fixe the decision was made to install the multi material upgrade which costs 329€ + shipping.
Half of that needs to be covered by donations. Just add yourself to the list below and make the payment in the safe in main room.
| Name | Amount | paid? |
|---|---|---|
| luto | 20 € | ✘ |
| you? | 10 € | ✘ |
| total | 20€ | 0€ |
