GoCNC: Unterschied zwischen den Versionen
aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springenReox (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „GoCNC is a small CNC-Fräse machine for milling in max A4 size. == Tech Specs == * Steppers are set to 1.5A, 8 Microsteps * Maximum working Plane: X165, …“) |
Reox (Diskussion | Beiträge) |
||
| Zeile 1: | Zeile 1: | ||
| + | {{Maschinenring}} | ||
| + | {{Languages|en}} | ||
| + | |||
GoCNC is a small [[CNC-Fräse]] machine for milling in max A4 size. | GoCNC is a small [[CNC-Fräse]] machine for milling in max A4 size. | ||
Version vom 31. Oktober 2013, 20:49 Uhr
3D-Scanner - CNC-Fräse - Laser - Reflow Oven - 3DPrinter (Prusa XL, Prusa Mk3S, Prusa Mini) - Vinylplotter - Schweißinverter -Tischbohrmaschine - Drehbank - Ultraschallreiniger - Nähmaschinen
| Language: | English |
|---|
GoCNC is a small CNC-Fräse machine for milling in max A4 size.
Tech Specs
- Steppers are set to 1.5A, 8 Microsteps
- Maximum working Plane: X165, Y290, Z65
- Maximum Speed: 1000mm/min - better use 800mm/min
- For use with Dremel or Proxxon Device as spindle
Configuration
Currently the mill is working with the LinuxCNC Setup on the CNC PC. There is an option for a USB Device that does the realtime stuff in a FPGA but that only works with a Windows PC.
If you are familiar with the LinuxCNC Workflow on the Geil-o-Mat, you can use it as well as on the GoCNC with the difference that the Spindle is NOT automatically turned on and off because the Relais on the control board can not be attached to the spindle!!!
