CNC-Fräse: Unterschied zwischen den Versionen

@@ Zeile 79: / Zeile 79: @@
 === Pocketing plexiglass ===
-Use one of the larger engraving bits to mill flat. Be careful with CutIncrement (1mm is ok).
+Choose engraving bit according to pocket size.
-Be aware that plexiglass melts, so it's important to run the vacuum cleaner as it has a certain cooling effect.
+Be careful with CutIncrement (1mm is ok).
+Be aware that plexiglass melts, so it's important to use cooling.
+For bigger pocket operations, the vacuum cleaner has a certain cooling effect.
+Air pressure and water cooling was necessary for the front door window engraving.
+Examples:
+* Front door text engraving:
+** 0.1mm engraving head
+** 0.3mm tool size in CamBam
+** 1mm depth
+** Spindle speed: 1
+** Feedrate: 20, plungerate: 20  (could have been a bit faster)
 === Drilling and cutting PCB's (epoxy) ===