Laser/Experiments: Unterschied zwischen den Versionen

VisuellWikitext

@@ Zeile 1: / Zeile 1: @@
+== about ==
+This section explores different possibilities of parameters and their outcome.
+This is a good place to get you an idea on how to fine tune your parameters.
+Material:
+* The material
+** different parameters 1
+** different parameters 2
+** different parameters 3
+* Soap
+** engraving a soap ended in the soap swelling,  or so I’ve heard.
+* Leather
+** Got a 1,5mm raw dark-brown leather, cutting goes incredibly well, but on one side it goes better then on the other. Speed: 45 or 40, Power: 100, Freq.: 2500
+** Engraving is not soo good, you can see the engraved parts, but only on 100/100, and then its not even black or something... May this depends on your leather
+* Thin felt ([http://www.creativehobbiesgroup.com/product/8436460 knorrprandel Bogen 1mm])
+** Speed 100%
+** Power 10%
+** Pulse frequency 2500Hz
+* Less thin felt (de: Filz), about 3mm
+** Cutting: Speed 90%, Power 20%
+** Engraving: more experiments to be done, but note: large black areas will melt the material deeply, thin lines will result in very betauful printing on the material (I used red felt, engraving on dark/brown/black felt might not make much sense)
-== about ==
+* Jeans / Denim
-this page is about exploring various lazzzor settings for varying materials to get the most out of it
+** engraving: 60% speed, 60% power.
+** engraving of denim glued onto wood: 60% speed, 100% power gets almost through the cloth and makes the wood partially visible.
+** cutting of denim glued onto wood: just cut a bit slower than through the wood alone (e.g. 15% speed instead of 20% speed)
+== ideas ==
+* making a example raster / vector file for experimental cuts
+** using color mapping for different speed/power/frequency in one job. One example is [[:Datei:slowdowntest.svg]], see also [[Laser/Parameters#Notes on engraving vector lines]].
+== settings for circuit boards ==
+* montana black 312g net/11 oz. blue spray paint use speed 50%, power 100% and 5000hz
-[[Category:Dokumentation]]
+[[Kategorie:English]]
-[[Category:Lazzzor]]
+[[Kategorie:Lazzzor]]
-[[Category:English]]