PCB etching notes in English: Unterschied zwischen den Versionen

aus Metalab, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Wechseln zu: Navigation, Suche
K (+cat.)
Zeile 6: Zeile 6:
  
 
* I used Kicad to produce the Gerbers and then used [http://circuitpeople.com/] to create a 600 DPI PNG file. I'm not sure if more recent versions of Kicad produce usable print files or not.
 
* I used Kicad to produce the Gerbers and then used [http://circuitpeople.com/] to create a 600 DPI PNG file. I'm not sure if more recent versions of Kicad produce usable print files or not.
 +
 +
* I used GIMP to lay-up multiple copies of the board to be etched in one file. On the CAD station it's in German language but the pretty icons help.
 +
 +
* The copper board I found was roughly 100mm x 160mm.
 +
 +
* There are white lab coats hanging on the back of the door to the "chemistry lab"--you will look particularly menacing when they are accessorised with black gloves.
 +
  
  

Version vom 1. Februar 2009, 18:05 Uhr

(As an English-speaking, non-German-speaking visitor to Metalab I thought I'd add a few notes from my experience making a PCB using Metalab facilities. -- follower)

  • You can probably find a number of English language UV etching guides online that you can use alongside the translated Metalab specific instructions. I used one from ladyada which was somewhat appropriate.
  • I used Kicad to produce the Gerbers and then used [1] to create a 600 DPI PNG file. I'm not sure if more recent versions of Kicad produce usable print files or not.
  • I used GIMP to lay-up multiple copies of the board to be etched in one file. On the CAD station it's in German language but the pretty icons help.
  • The copper board I found was roughly 100mm x 160mm.
  • There are white lab coats hanging on the back of the door to the "chemistry lab"--you will look particularly menacing when they are accessorised with black gloves.


(Hopefully more to be added.)