Ctrl-Cut: Unterschied zwischen den Versionen

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
(Die Seite wurde neu angelegt: „= Ctrl-Cut = == WTF? == The Metalab has a nice and shiny Lazzzor from [http://epiloglaser.com Epilog]. Unfortunately, Epilog forces us to use their Microsof…“)
 
 
(27 dazwischenliegende Versionen von 3 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
= Ctrl-Cut =
+
{{Projekt
 +
|image=
 +
|involved=[[User:Amir|amir]] and [[User:pwnschlager|meks]]
 +
|startdate=2021-03-28
 +
|status=active
 +
|wtf=Porting ctrl-cut to the new laser
 +
|lastupdate=
 +
|hidden=false
 +
}}
  
 
== WTF? ==
 
== WTF? ==
  
The Metalab has a nice and shiny [[Lazzzor]] from [http://epiloglaser.com Epilog].
+
The Metalab has a nice and shiny [[Lazzzor]] from <strike>[http://epiloglaser.com Epilog].
Unfortunately, Epilog forces us to use their Microsoft Windows-only laser cutter drivers. In addition, they only support Corel Draw as an application from which you can run jobs (other tools might work but are not supported).
+
Unfortunately, Epilog forces us to use their Microsoft Windows-only laser cutter drivers. In addition, they only support Corel Draw as an application from which you can run jobs (other tools might work but are not supported).</strike> BRM Lasers (model: brm 90130) and they provide a driver that seems to be quite awesome _but_ it is closed source and it is very complicated (way more like a cnc mill than the laser cutter we had). So for three reasons pwnschlager and me are going to port ctrl-cut to the new laser:
 +
* Ctrl-Cut uses a simple, well known workflow a lot of people already know. That limits their ability to fully control the machine in all its detail, but it also shields them from the complexity. So if you just want to do a quick laser job like you used to do Ctrl-Cut is choice.
 +
* We want the freedom to be able to fix bugs we encounter ourselves and workaround bugs in the original software and in the laser cutter itself. Also we want to be able to add new cool features.
 +
* RDCAM (the vendor driver) only supports dxf as vector format. we want pdf and svg.
  
(There are also multiple other shortcomings of the Epilog drivers, which we will elaborate on later.)
+
== Want to help? ==
 
 
To remedy this, we are writing our own drivers, which will run on both Linux and Mac OS X (and any other system supporting [http://cups.org CUPS].
 
 
 
== Sources ==
 
  
Sources are here: [https://github.com/Metalab/ctrl-cut https://github.com/Metalab/ctrl-cut].
+
Talk to [[User:Amir|amir]] or [[User:pwnschlager|pwnschlager]]
  
== Want to help? ==
+
== Progress ==
 +
https://chaos.social/@lazzzzzor
  
Talk to Amir or Marius - one of us might happen to have some braincycles allocated to this project.
+
[[Laser/Hacking]]
  
 
[[Kategorie:Lazzzor]]
 
[[Kategorie:Lazzzor]]
 
[[Kategorie:Projekte]]
 
[[Kategorie:Projekte]]

Aktuelle Version vom 26. Mai 2021, 22:39 Uhr


Ctrl-Cut
Gestartet: 2021-03-28
Involvierte: amir and meks
Status: active
Beschreibung: Porting ctrl-cut to the new laser
Shutdownprozedur:
Zuletzt aktualisiert: 2021-05-26


WTF?

The Metalab has a nice and shiny Lazzzor from Epilog. Unfortunately, Epilog forces us to use their Microsoft Windows-only laser cutter drivers. In addition, they only support Corel Draw as an application from which you can run jobs (other tools might work but are not supported). BRM Lasers (model: brm 90130) and they provide a driver that seems to be quite awesome _but_ it is closed source and it is very complicated (way more like a cnc mill than the laser cutter we had). So for three reasons pwnschlager and me are going to port ctrl-cut to the new laser:

  • Ctrl-Cut uses a simple, well known workflow a lot of people already know. That limits their ability to fully control the machine in all its detail, but it also shields them from the complexity. So if you just want to do a quick laser job like you used to do Ctrl-Cut is choice.
  • We want the freedom to be able to fix bugs we encounter ourselves and workaround bugs in the original software and in the laser cutter itself. Also we want to be able to add new cool features.
  • RDCAM (the vendor driver) only supports dxf as vector format. we want pdf and svg.

Want to help?

Talk to amir or pwnschlager

Progress

https://chaos.social/@lazzzzzor

Laser/Hacking