CCCamp2007/Blitzenlights

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Version vom 12. Mai 2013, 14:06 Uhr von AndiS (Diskussion | Beiträge) (Gardening, Categories)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Zur Navigation springenZur Suche springen

About

Blitzenlights is a project created for the camp decoration of the Chaos Communication Camp 2007. The goal was to build a chain of sequentially flashing LEDs, creating a kind of "running light pulse" feeling. The circuit is more or less completely analog.

The Big Picture

The system consists of small modules with one LED each, which are connected by a 3-wire cable. The total length of one Blitzenlight chain can be almost any length, in our setup we chose to put them every 0.75m resulting in a total length of about 30-50m.

The Small Picture

schematic of the module

Each module has 2 connection ports: an incoming, with 2 power lines and a trigger signal, and an outgoing one with eaxctly the same signals. The circuit itself is a standard monoflop built with 2 transistors. Additionally, we couple the trigger signal into the base of the pulse-active transistor, thus triggering the monoflop with a positive edge. When the monoflop falls back into its stable state, it raises the voltage at the outgoing capacitor, which will trigger the next module down the road. Simple as that.

pcb layout, 56 modules


The Setup

(well, still need to load up pictures :)