Laser/Next gen/en
| Language: | English |
|---|
Lasercutter Replacement
Since our laser cutter is quite old now, discussions have flared up frequently on whether we should replace it with a more modern model. This page was created to collect all the findings of the Metalab Lasercutter Replacement Research Team™.
Option 1: Benchtop
There are some modern benchtop laser cutters available. They're much cheaper and smaller than what we currently have and have a great UI (including things like live preview for placing the cuts using a webcam).
- Laserbox: the downside with this specific one is that is requires a cloud web interface for operation. So, if the VC startup company goes down, the device stops working.
- Glowforge: very similar as the one above, with the same downside.
- Dremel LC40: As far as anlumo has been able to find out, they're only sold in the US for now.
All of the ones anlumo was able to locate are only 40W.
Option 2: Traditional
Trotec Speedy 400? Also has a fiber laser, which extends the range of possible materials (including 0.5mm aluminium!).
Option 3: China Cutter
- This one for example. Free VAT-included shipping within EU!
One major issue for these is that we sometimes need spare parts, like a CO2 tube replacement. Also, the software is probably even worse than the one by Epilog.
Option 4: Combination Devices
The best solution would be a device that can do CNC milling, laser cutting/engraving and plasma cutting with the same frame. While this is not really a problem on the technical side, we were unable to find any product for this except some DIY attempts. Going DIY would also be an option, but it's probably a lot of work and involves handling a class 4 laser tube with adequate safety installations.
