Laser/Next gen/en: Unterschied zwischen den Versionen

Version vom 16. Juli 2020, 18:41 Uhr Quelltext anzeigen Anlumo (Diskussion \| Beiträge) 1.713 Bearbeitungen Keine Bearbeitungszusammenfassung ← Zum vorherigen Versionsunterschied		Version vom 16. Juli 2020, 18:47 Uhr Quelltext anzeigen Anlumo (Diskussion \| Beiträge) 1.713 Bearbeitungen →Option 4: Combination Devices Zum nächsten Versionsunterschied →
Zeile 27:		Zeile 27:
	== Option 4: Combination Devices ==		== Option 4: Combination Devices ==

	The best solution would be a device that can do CNC milling, laser cutting/engraving and plasma cutting with the same frame. While this is not really a problem on the technical side, we were unable to find any product for this ~~over~~ some DIY attempts. Going DIY would also be an option, but it's probably a lot of work and involves handling a class 4 laser tube with adequate safety installations.		The best solution would be a device that can do CNC milling, laser cutting/engraving and plasma cutting with the same frame. While this is not really a problem on the technical side, we were unable to find any product for this except [https://hackaday.com/2019/05/12/modular-cnc-build-gets-you-both-a-mill-and-a-laser-cutter/ some DIY attempts]. Going DIY would also be an option, but it's probably a lot of work and involves handling a class 4 laser tube with adequate safety installations.