PacmanCaster: Unterschied zwischen den Versionen

@@ Zeile 16: / Zeile 16: @@
 We are going to use the CNC mill to create the body.</strike>
 This page is about the e-guitar i built. :)
+=== Essential equipment for building and assembling a guitar body ===
+The following list of equipment is what '''''_I_''''' found to be essential for building a guitar body. You might be able to do it with a completely different stack or just less items.
+# CNC router
+# A long mill bit with 6 or less mm diameter (rounding radius of <= 3) that works all the way through 45 mm thick wood
+# Sanding paper 40-5000 grit
+# A router table (can be easily constructed from a template router)
+# A template router
+# An orbital sander (well, not strictly necessary but it safes lots and lots of time)
+# An oscillating belt and spindle sander. (also a huge time safer)
+# A band saw (you can easily find your way around this one, but it's a huge comfort)
+# Wood drill set
+# Metal drill set
+# Screw driver set
+# A set of hex keys
+# A wire cutter
+# A solder iron
+# Solder tin
+# Gavitt Wire
+# A multimeter
+# Shielding tape
+# A paint brush
+# A wood primer that also acts as a filler
+# Compatible paint
+# Compatible lacquer
+# Masking tape
+# Forstner bits
+# Milling bits with a thrust ring for the template router
+# Respirator mask