CNC-Fräse: Unterschied zwischen den Versionen

Zeile 479:

The current machine's state is given by a coordinate triple, and some states (emergency swich, spindle speed, ...). The machine '''coordinate system''' is defined by the now automated homing routine. Thereafter, one can move the machine to a location, and "touch off", giving explicit coordinates for this location. Thereby the working coordinate system is defined. This is also the system displayed in Axis, However, in the background, the machine still works in the home-coordinate system for checking its movement limits. Clever!

~~== CNC PC ==~~

On the CNC PC runs a Ubuntu version with a realtime kernel and 2.6 LinuxCNC. Because the dependecies for linuxcnc are really messed up, please do not try to update the PC! --[[Benutzer:Reox|Reox]] 14:36, 31. Aug. 2013 (CEST)

* The PC has a Backup Harddisk, which contains a complete working system image for system restore.

* The linuxcnc config folder (/home/cnc/linuxcnc/config) is a git repo, so please commit your changes if you changed something on the config.

* Better: If you want to try new settings copy the Geilomat config and create your own - the Geilomat setup should be sufficant for everyone, so you need good reason to change it

* The PC has APIC disabled, because of realtime kernel jitter reasons. so if you power it down, you need to press the power button after the system says "system halted"

~~If you ever need to set up from scratch, here is the LinuxCNC config (which should be all you need to run the system): https://github.com/Metalab/linuxcnc_config~~

[[Kategorie:Maschinen]]

[[Kategorie:WhateverLab]]