CNC-Fräse: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) |
Reox (Diskussion | Beiträge) adding youtube videos |
||
| Zeile 61: | Zeile 61: | ||
Ask for help, if you need to clamp or measure an complex part! There is always some trick you can use. | Ask for help, if you need to clamp or measure an complex part! There is always some trick you can use. | ||
Here is a good example for the workflow of CNC machining (and some more explanations) using Autodesk Fusion and Mach3/4 (quite similar to LinuxCNC): [https://youtu.be/YBGqknN3gGs CNC Dummies For Routers] & [https://youtu.be/J4bMAIEFCYU CNC Basics 2] | |||
=== Start Up === | === Start Up === | ||