CNC-Fräse: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) |
Reox (Diskussion | Beiträge) |
||
| Zeile 341: | Zeile 341: | ||
But milling MDF has some pitfalls: | But milling MDF has some pitfalls: | ||
* Mill the depest holes first. If you remove the hard cover of the MDF plate, the internal structure will not hold very good... | |||
* MDF tends to frezzle, if the facings are removed. Reportedly, a very sharp wood plunge mill will reduce the amout of frezzle, use one with 15 degree of spiral angle or less | * MDF tends to frezzle, if the facings are removed. Reportedly, a very sharp wood plunge mill will reduce the amout of frezzle, use one with 15 degree of spiral angle or less | ||
* The dust of MDF is toxic. Use a vacuum (and respirator)! | * The dust of MDF is toxic. Use a vacuum (and respirator)! | ||