CNC-Fräse: Unterschied zwischen den Versionen
Ripper (Diskussion | Beiträge) K Parameter für Alu, xBox controller hinweis |
Reox (Diskussion | Beiträge) more infos for setup from scratch |
||
| Zeile 454: | Zeile 454: | ||
* Better: If you want to try new settings copy the Geilomat config and create your own - the Geilomat setup should be sufficant for everyone, so you need good reason to change it | * Better: If you want to try new settings copy the Geilomat config and create your own - the Geilomat setup should be sufficant for everyone, so you need good reason to change it | ||
* The PC has APIC disabled, because of realtime kernel jitter reasons. so if you power it down, you need to press the power button after the system says "system halted" | * The PC has APIC disabled, because of realtime kernel jitter reasons. so if you power it down, you need to press the power button after the system says "system halted" | ||
If you ever need to set up from scratch, here is the LinuxCNC config (which should be all you need to run the system): https://github.com/Metalab/linuxcnc_config | |||
[[Kategorie:Maschinen]] | [[Kategorie:Maschinen]] | ||
[[Kategorie:WhateverLab]] | [[Kategorie:WhateverLab]] | ||