CNC-Fräse: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) adding text from ML about t-nut platten |
Reox (Diskussion | Beiträge) adding different linuxcnc profiles |
||
| Zeile 37: | Zeile 37: | ||
# Start CNC PC (do not turn on the G4 (The "G4 Case" stepper control thing), neither the VFD) | # Start CNC PC (do not turn on the G4 (The "G4 Case" stepper control thing), neither the VFD) | ||
# Start LinuxCNC | # Start LinuxCNC | ||
## If you are using the T-notch plate, choose the Shortcut "Geil-O-Mat starten (T-Nut Platten, Z Limit 107mm)" | |||
## Otherwise choose "Geil-O-Mat starten (Z Limit 112.5mm)" which has extra 5.5mm Z-Axis travelling distance | |||
# Press the emergency stop at the machine frame (if not already pressed) | # Press the emergency stop at the machine frame (if not already pressed) | ||
# Power on the Stepper Driver (The G4 Case) | # Power on the Stepper Driver (The G4 Case) | ||