CNC-Fräse: Unterschied zwischen den Versionen

@@ Zeile 58: / Zeile 58: @@
 === Power Down ===
-* Move Machine in a position where you can easily clean it and remove millheads
+# Move Machine in a position where you can easily clean it and remove millheads. The back right corner is a good choice!
-* Press Emergency Stop
+# Press Emergency Stop
-* Plug out VFD
+# Plug out VFD
-* Shut down G4
+# Shut down Stepper Drivers
-* Exit LinuxCNC
+# Exit LinuxCNC
-* Power off PC
+# Power off PC
-* Remove Millhead and Clamp
+# After seeing "System Halted" press the Power Button of the PC
-* Clean the machine-bed and everything else.
+# Remove Cutter and Clamp
+# Clean the machine-bed and everything else.
 == Wie Spanne ich ein Werkzeug richtig ein ==