CNC-Fräse: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) |
Reox (Diskussion | Beiträge) |
||
| Zeile 172: | Zeile 172: | ||
| Wood ||3||0.8||50%||12000||600|| looked good, material was plywood 8mm | | Wood ||3||0.8||50%||12000||600|| looked good, material was plywood 8mm | ||
|- | |- | ||
| Wood (Leimholz Fichte) || | | Wood (Leimholz Fichte) || 6mmZ3 || 2 || 100% || 23000 || 1000 || Works fine, also tested 0.5, 1.0 and 1.5mm | ||
|- | |- | ||
| Wood (Leimholz Fichte) || | | Wood (Leimholz Fichte) || 6mmZ3 || 6 || 1mm || 23000 || 1000 || Für Kanten, Stege auf der Holzplatte brechen aus (Achtung) | ||
|- | |- | ||
| Aluminium || 6 || 0.25 || 6mm || 10000 || 1100 || Vierschneider, schleppender Schnitt - no external cooling | | Aluminium || 6 || 0.25 || 6mm || 10000 || 1100 || Vierschneider, schleppender Schnitt - no external cooling | ||