CNC-Fräse: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) |
Reox (Diskussion | Beiträge) |
||
| Zeile 161: | Zeile 161: | ||
| Aluminium || 6 || 0.25 || 6mm || 10000 || 650 || Zweischneider, schleppend und ziehender schnitt - no external cooling | | Aluminium || 6 || 0.25 || 6mm || 10000 || 650 || Zweischneider, schleppend und ziehender schnitt - no external cooling | ||
|- | |- | ||
| PCB engrave||0.1-0.3 30deg||0.3|| ||12000||1000|| tested in epoxy-pcb | | PCB engrave||0.1-0.3 30deg||0.3|| 0.035 ||12000||1000|| tested in epoxy-pcb | ||
|- | |- | ||
| PCB drill||0.9 ||-2.5|| ||14000||400|| tested in epoxy-pcb | | PCB drill||0.9 ||-2.5|| 0.5 ||14000||400|| tested in epoxy-pcb | ||
|- | |- | ||
| Plexiglass Front door engrave||0.1 30deg?||1|| ||10000||20|| Plunge 20, toolsize cambam 0.3 | | Plexiglass Front door engrave||0.1 30deg?||1|| ||10000||20|| Plunge 20, toolsize cambam 0.3 | ||