CNC-Fräse: Unterschied zwischen den Versionen
Keine Bearbeitungszusammenfassung |
|||
| Zeile 99: | Zeile 99: | ||
! Head Diameter mm | ! Head Diameter mm | ||
! Cutting Depth mm | ! Cutting Depth mm | ||
! | ! Sidewards depth in % of diameter | ||
! Spindle Speed | ! Spindle Speed | ||
! Feed Rate mm/min | ! Feed Rate mm/min | ||
| Zeile 106: | Zeile 106: | ||
| MDF ||8||2||?||2||30||MDF is usually too thick to be milled with our normal milling heads, so we're using a bigger (8mm diameter) end mill. Plunge 10. | | MDF ||8||2||?||2||30||MDF is usually too thick to be milled with our normal milling heads, so we're using a bigger (8mm diameter) end mill. Plunge 10. | ||
|- | |- | ||
| Wood ||3||2||50||2-3||>300|| guessed proposal | | Wood ||3||2||50%||2-3||>300|| guessed proposal | ||
|- | |- | ||
| Aluminium||3||1||50||3||300|| guessed proposal with cooling | | Aluminium||3||1||50%||3||300|| guessed proposal with cooling | ||
|- | |- | ||
| PCB engrave||0.1 30deg||0.3|| | | PCB engrave||0.1 30deg||0.3|| ||5-9||400|| guessed proposal | ||
|- | |||
| Plexiglass Front door engrave||0.1 30deg?||1|| ||1||20|| Plunge 20, toolsize cambam 0.3 | |||
|- | |||
| Plexiglass egg||1.5 30deg?||0.5|| ||3||100|| Plunge 30, toolsize cambam 1.5 : 4mm thick plexiglass 400x300 | |||
|- | |||
| Plexiglas Portrait ||0.1 30deg?||4|| ||1||?|| 0.3mm raster, Custom tool to convert from image to gcode | |||
|- | |- | ||
|} | |} | ||
Pocketing plexiglass: | |||
* | * Choose engraving bit according to pocket size. | ||
* | * Be careful with CutIncrement (1mm is ok). | ||
* | * Be aware that plexiglass melts, so it's important to use cooling. | ||
* | * For bigger pocket operations, the vacuum cleaner has a certain cooling effect. | ||
* | * Air pressure and water cooling was necessary for the front door window engraving. | ||
==How to== | ==How to== | ||