Fonera: Unterschied zwischen den Versionen
| Zeile 6: | Zeile 6: | ||
=== Mac OS X === | === Mac OS X === | ||
| − | + | Since EasyFlash isn't available for Max OS X, we do this manually (FON2200 + ethernet only): | |
| − | |||
| + | '''1. Set IP address of your Mac:''' | ||
<pre> | <pre> | ||
sudo ifconfig en0 192.168.1.254 | sudo ifconfig en0 192.168.1.254 | ||
</pre> | </pre> | ||
| + | |||
| + | |||
| + | '''2. Enable tftp''' | ||
Either temporarily enable tftpd serving files from /private/tftpboot/: | Either temporarily enable tftpd serving files from /private/tftpboot/: | ||
| Zeile 29: | Zeile 32: | ||
</pre> | </pre> | ||
| − | openwrt | + | '''3. Copy OpenWRT files to tftp dir:''' |
| + | |||
| + | These files are typically what you want to use: | ||
| + | * openwrt-atheros-2.6-vmlinux.lzma | ||
| + | * openwrt-atheros-2.6-root.squashfs | ||
| − | + | '''4. Get access to the RedBoot bootloader:''' | |
| − | http://forum.openwrt.org/viewtopic.php?pid=63402 | + | |
| + | See also http://forum.openwrt.org/viewtopic.php?pid=63402. | ||
<pre> | <pre> | ||
echo -e "\003" > break | echo -e "\003" > break | ||
| + | </pre> | ||
fonera an den strom, wenn das 2te led zu blinken beginnt: | fonera an den strom, wenn das 2te led zu blinken beginnt: | ||
| + | <pre> | ||
nc -vvv 192.168.1.1 9000 < break; | nc -vvv 192.168.1.1 9000 < break; | ||
| + | </pre> | ||
danach ctrl+c | danach ctrl+c | ||
| + | <pre> | ||
telnet 192.168.1.1 9000 | telnet 192.168.1.1 9000 | ||
| + | </pre> | ||
| + | |||
| + | -> You should now have a "RedBoot>" prompt. If not, rince and repeat. | ||
| + | '''5. Flash new kernel and filesystem images in RedBoot:''' | ||
| + | |||
| + | In RedBoot: | ||
| + | <pre> | ||
fis init | fis init | ||
| − | load -r -b 0x80041000 openwrt-atheros-vmlinux.lzma | + | load -r -b 0x80041000 openwrt-atheros-2.6-vmlinux.lzma |
fis create -e 0x80041000 -r 0x80041000 vmlinux.bin.l7 | fis create -e 0x80041000 -r 0x80041000 vmlinux.bin.l7 | ||
| − | load -r -b 0x80041000 openwrt-atheros-root.squashfs | + | load -r -b 0x80041000 openwrt-atheros-2.6-root.squashfs |
fis create -l 0x06F0000 rootfs | fis create -l 0x06F0000 rootfs | ||
| − | + | </pre> | |
| − | |||
| − | + | '''6. Reboot''' | |
| − | telnet 192.168.1.1 | + | You are now where EasyFlash ends. |
| − | + | Wait for the boot to finish and telnet to 192.168.1.1 and set a root password. | |
=== Windows/Linux (easyflash): === | === Windows/Linux (easyflash): === | ||
Version vom 8. März 2008, 15:29 Uhr
Fonera
FLASHING
Mac OS X
Since EasyFlash isn't available for Max OS X, we do this manually (FON2200 + ethernet only):
1. Set IP address of your Mac:
sudo ifconfig en0 192.168.1.254
2. Enable tftp
Either temporarily enable tftpd serving files from /private/tftpboot/:
sudo launchctl load -F /System/Library/LaunchDaemons/tftp.plist
..or permanently enable tftpd serving files from custom directory:
tftpserver config in /System/Library/LaunchDaemons/tftp.plist disabled auf false directory auf irgendein worldreadable dir $sudo launchctl load -F /System/Library/LaunchDaemons/tftp.plist start com.apple.tftpd
3. Copy OpenWRT files to tftp dir:
These files are typically what you want to use:
- openwrt-atheros-2.6-vmlinux.lzma
- openwrt-atheros-2.6-root.squashfs
4. Get access to the RedBoot bootloader:
See also http://forum.openwrt.org/viewtopic.php?pid=63402.
echo -e "\003" > break
fonera an den strom, wenn das 2te led zu blinken beginnt:
nc -vvv 192.168.1.1 9000 < break;
danach ctrl+c
telnet 192.168.1.1 9000
-> You should now have a "RedBoot>" prompt. If not, rince and repeat.
5. Flash new kernel and filesystem images in RedBoot:
In RedBoot:
fis init load -r -b 0x80041000 openwrt-atheros-2.6-vmlinux.lzma fis create -e 0x80041000 -r 0x80041000 vmlinux.bin.l7 load -r -b 0x80041000 openwrt-atheros-2.6-root.squashfs fis create -l 0x06F0000 rootfs
6. Reboot
You are now where EasyFlash ends. Wait for the boot to finish and telnet to 192.168.1.1 and set a root password.
Windows/Linux (easyflash):
http://downloads.berlin.freifunk.net/fonera/ [ ] ap51-flash-fonera-1.0-38 18-Dec-2007 19:10 3.3M [ ] ap51-flash-fonera-gui-1.0-38.exe 18-Dec-2007 19:12 3.3M Passendes Tool runterladen. http://downloads.openwrt.org/kamikaze/7.09/atheros-2.6/ [ ] openwrt-atheros-2.6-root.jffs2-64k 30-Sep-2007 20:16 1.6M [ ] openwrt-atheros-2.6-vmlinux.lzma 30-Sep-2007 20:16 768K die beiden runterladen. Jetzt kommts.. 1. Fonera mit ETHERNETKABEL an eth0 anstecken. 2. ./ap51-flash-fonera-1.0-38 eth0 openwrt-atheros-2.6-root.jffs2-64k openwrt-atheros-2.6-vmlinux.lzma 3. Strom an den Fonera anstecken Der Fonera schickt nun beim hochfahren einen ARP request raus, das Flashtool wartet darauf und tut dann seine Magie. Der ganze Flashvorgang dauert rund _15_ Minuten. Zuerst sieht man die IP vom Router Dann steht da was von Loading RootFS .. Writing RootFS.. (10 Minuten) Loading Kernel .. Writing Kernel.. Rebooting Device.. Fertig. Danach hat der Fonero die IP 192.168.1.1 und ist über TELNET erreichbar. Happy hacking.
SOFTWARE
software zum flashen + packages .. http://download.berlin.freifunk.net/fonera/
Buildchain
http://wiki.openwrt.org/BuildingPackagesHowTo
svn co https://svn.openwrt.org/openwrt/tags/kamikaze_7.09
http://forum.openwrt.org/viewtopic.php?pid=31794#p31794
Fettes ipkg repository
http://downloads.openwrt.org/kamikaze/packages/mips/
HARDWARE
LCD am fonera? http://www.lefinnois.net/wpen/index.php/2007/11/11/lcd-screen-for-la-fonera/
I2C bus? http://www.lefinnois.net/wpen/index.php/2007/05/13/i2c-bus-for-la-fonera/
SD card am fonera? http://www.larsen-b.com/Article/262.html http://phrozen.org/fonera.html
GPIO kernel modul http://mobileaccess.de/fonera/gpio/ http://daubau.net/proc_gpio/
Fertig compiliertes GPIO kernelmodul im feschen .ipk + src Media:Kamikaze_7.09_GPIOkmod.tar.gz
