Envelope holder: Unterschied zwischen den Versionen
Ripper (Diskussion | Beiträge) (mit bild) |
Ripper (Diskussion | Beiträge) (→Envelopes: now with files) |
||
| Zeile 25: | Zeile 25: | ||
The files (tested with Libre Office Writer) are below: | The files (tested with Libre Office Writer) are below: | ||
| − | * [[ | + | * [[Datei:Lazzzor_envelope.odt]] |
| − | * [[ | + | * [[Datei:Cutter_envelope.odt]] |
| − | * [[ | + | * [[Datei:3d_printer_envelope.odt]] |
| − | * [[ | + | * [[Datei:2d_printer_envelope.odt]] |
| − | * [[ | + | * [[Datei:Electronic_components_envelope.odt]] |
| − | * [[ | + | * [[Datei:General_envelope.odt]] in the main room |
Aktuelle Version vom 19. Januar 2020, 17:40 Uhr
| Language: | English |
|---|
| Envelope holder | |
| |
| Gestartet: | 2020-01-18 |
| Involvierte: | User:ripper |
| Status: | completed |
| Beschreibung: | Lasercut thing for envelopes found at various places around Metalab |
| Shutdownprozedur: | |
| Zuletzt aktualisiert: | 2020-01-19 |
What is this?
Usage of certain equipment at Metalab like the Lazzzor and the Vinylplotter needs to be paid, either for usage time or for material costs. For other equipment like the 2D printer and the Prusa 3D printer it is expected to make a small donation to cover material cost if you use it a lot. Therefore holders glued together from parts of laser cut plywood for the individually printed envelopes are placed there.
Holder vector files
You need to cut the following files out of 4mm wood:
- Datei:Envelope holder back.dxf
- Datei:Envelope holder front.dxf
- Datei:Envelope holder bottom.dxf
- 2x Datei:Envelope holder side.dxf
Envelopes
Holders are designed for C6 format (162x114mm) which can be printed with the Konica Minolta printer but only in landscape orientation, with the envelopes inserted as shown in the picture (if they should be oriented the right way):
The files (tested with Libre Office Writer) are below:
