Metalock2.0: Unterschied zwischen den Versionen
Pete (Diskussion | Beiträge) |
Pete (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
||
| Zeile 15: | Zeile 15: | ||
== How == | == How == | ||
* Only Software of Door Status is on Github | * Only Software of Door Status is on Github. | ||
Lessons learned: <br> | Lessons learned: <br> | ||
| Zeile 22: | Zeile 22: | ||
Hardware documentation | Hardware documentation | ||
* tbd (how is everything connected) | * tbd (how is everything connected) | ||
* Door Status is wired directly to the door status switch. Voltage divider is between the 2 connectors of the soor status Switch. | |||
From 5V to 3V for the Raspberry Pi GPIO. 22K Ohm + 33K Ohm Resistors. | |||
Software documentation | Software documentation <br> | ||
<b>Metalock2.0</b> | |||
* TBD ;) (yeah right..) (pitfalls, config, buildprocess) | * TBD ;) (yeah right..) (pitfalls, config, buildprocess) | ||
* IP: 10.20.30.77 (local IPv4 of | * IP: 10.20.30.20 (local IPv4 of DOCKSTAR) | ||
<b>Door Status:</b> | |||
* IP: 10.20.30.77 (local IPv4 of Raspberry Pi) | |||
* Software of Doorstatus: https://github.com/Metalab/metadoor | |||
== Reference == | == Reference == | ||