Archiv:OldLaser (2021): Unterschied zwischen den Versionen
Pl (Diskussion | Beiträge) →Willst du etwas lasern?: mention the info for non-members page |
Chrysn (Diskussion | Beiträge) →Cheats: handling missing air assist |
||
| Zeile 146: | Zeile 146: | ||
** Multiple passes=print tab->number of copies... | ** Multiple passes=print tab->number of copies... | ||
** The rulers can be flipped to take out the hexahedral baseplate. | ** The rulers can be flipped to take out the hexahedral baseplate. | ||
* Compressor ("Air assist") does not work / flames / paper and wood start burning: | |||
** Check air assist by cutting a long line slowly with open cover, and feel for airflow. | |||
** If no airflow present, set the line color to red, enable color mapping in the laser settings, switch air assist off for red, run the program. Repeat with air assist switched on. This should now be the default setting again -- feel for air flow to be sure. | |||
* [[Laser/Experiments|Laser experiments]] | * [[Laser/Experiments|Laser experiments]] | ||