CNC-Fräse: Unterschied zwischen den Versionen

Zeile 9:

|teachers=[https://lists.metalab.at/mailman/listinfo/cnc CNC Mailing List]

}}

__TOC__

<span style="color: red;">'''WARNING:''' Do not use this machine if you did not had a previous introduction to the workflow. It is quite complex and working with this device can be easily result in a visit to the hospital...</span>

Zeile 127:

Zeile 128:

Please note that these Values are produced under different circumstances - like how many "Schneiden" a mill has or what kind of mill you are using!

Please use also "Drehzahlrechner" for looking up proper values.

Please be aware that, like with the lasercutter, not every material can be cut and for each material you have certain parameters. These parameters are in the first place a result of the tool you use but also depends on chemical and mechanical compound of the material you need to cut.

For example there are a lot of aluminium types, like AlMgSiPb or AlCuBiPb which is very good for milling and also pure Al99,5 which is very very bad for milling!!!

This counts for all types of material, also for wood! e.g. MDF has very different cutting parameters than birch wood...

{| class="wikitable" border="1" cellpadding="5" cellspacing="0" align="center"

Zeile 214:

Zeile 219:

==== Weitere Parameter ====

* '''InsideOutside''' Falls man die Outline verkehrt herum geyeichnet hat kann man mit dieser option innen und aussen umdrehen (einfach mal ausprobieren)

Zeile 223:

Zeile 224:

[[PCB_CNC]]

=== Aluminium ===

Maximum Millheadsize should be 6mm on our Machine!

Zeile 228:

Zeile 231:

Spanabfuhr is quite a problem and our machine is not as stiff as we would like to have it for milling aluminium. so larger a_p would not work because the millhead will be bend to much.

== Toolchain ==