Zum Inhalt springen

CNC-Fräse: Unterschied zwischen den Versionen

← Zum vorherigen VersionsunterschiedZum nächsten Versionsunterschied →
VisuellWikitext
Reox (Diskussion | Beiträge)
1.121 Bearbeitungen
Reox (Diskussion | Beiträge)
1.121 Bearbeitungen
Zeile 82: Zeile 82:
== Current Status==
== Current Status==


* EMC is quite configured. Max-Movement speed is approx 1980 mm/min.
* Max-Movement speed is approx 2000 mm/min.
** Consider not drive this fast anyway - 2200mm/min is currently a good setup without loosing steps
** If you use feed-override, please make sure not to run with 1980*1,5mm/min!
 
* Homeing procedure in EMC is functional, and by that also soft-limits. Its now "nearly" impossible to move over some limits. Start EMC, turn machine on with f1/f2, press "home all", wait 30 sec. Than traverse to the wished zero of your working coordinate system, and touch off in all three axes.
* Homeing procedure in EMC is functional, and by that also soft-limits. Its now "nearly" impossible to move over some limits. Start EMC, turn machine on with f1/f2, press "home all", wait 30 sec. Than traverse to the wished zero of your working coordinate system, and touch off in all three axes.
* The Spindle, aka the Mechatron, is switched on/off automatically.
* The Spindle, aka the Mechatron, is switched on/off automatically.
Zeile 93: Zeile 90:
* Double sided boards kind of work, although its a bit tricky: [[PCB_CNC]]
* Double sided boards kind of work, although its a bit tricky: [[PCB_CNC]]


 
* The Historical Documents were moved here: [[Geil-o-mat/History|History of the famous Geil-o-mat, formerly known as CNC]]
=== Todo ===
* The Whistlist, Todo stuff is now here: [[Geil-o-mat/Future|Future of Geil-o-mat]]
 
 
* http://softsolder.com/2010/04/17/ugliest-tool-length-probe-switch-repeatability/
* get some flat 4-5 mm wood to put underneath the actual workpeace for cutting/milling through.
* Revitalize the "Absaugung"
* Reboot the lubrication thingy.
** It works by turning on the compressor. The Hex-Screw changes the ammount, the ball-stick turns it on/off.
* Find a way of dealing with oily aluminium dust.
* buy some normal wood in reasonable size (40x100x1.8 cm)
* organize some aluminium for testing
 
=== Ideas ===
 
* build/buy a [http://www.vinland.com/Touch-Probe.html touch-probe] (or [http://www.indoor.flyer.co.uk/probe.htm like this]).
* Build/buy a [http://www.cnc-modellbau.net/shop/start.htm?spannmittel_vakuumtische.htm Vakuum-Table ]
 
* A [http://asset.soup.io/asset/0830/5162_2b28_960.jpeg led-ring] for illumination the milling location.
* Build a 4th, [http://www.youtube.com/watch?v=O-RzYjSPzP4&feature=related rotating axis].
--[[Benutzer:Bkubicek|Bkubicek]] 13:44, 4. Jun. 2010 (CEST)
 
=== Wishlist ===
 
* too much ;)
 
 
The Historical Documents were moved here: [[Geil-o-mat/History|History of the famous Geil-o-mat, formerly known as CNC]]


==Reference==
==Reference==
Abgerufen von „https://metalab.at/wiki/CNC-Fräse“