CNC-Fräse: Unterschied zwischen den Versionen
| Zeile 219: | Zeile 219: | ||
You need a 0.6 or 0.8 mm drill with a mounting diameter suitable for the Kress-"Spannzange", probably 3mm or 1/8 inch=3.1something. | You need a 0.6 or 0.8 mm drill with a mounting diameter suitable for the Kress-"Spannzange", probably 3mm or 1/8 inch=3.1something. | ||
We will create three ngc-files, one for the isolation, one for the drilling, and one for the final cutting. They will be glued together in one ngc file to align them using | We will create three ngc-files, one for the isolation, one for the drilling, and one for the final cutting. They will be glued together in one ngc file to align them graphically using ''Axis''. | ||
* Prerequisites: | * Prerequisites: | ||
| Zeile 235: | Zeile 235: | ||
* Output using File->RUN->(ulp-directory)->gcode.ulp . Layer "bottom", Mill and drill deaktivated, cut active,outputfile "cut_boardname.ngc", other parameters are nearly irrelevant. | * Output using File->RUN->(ulp-directory)->gcode.ulp . Layer "bottom", Mill and drill deaktivated, cut active,outputfile "cut_boardname.ngc", other parameters are nearly irrelevant. | ||
* Then start Visolate, load the gerber file, make if | * Then start Visolate, load the gerber file, make if full screen. press Fit. Fix Topology. Make toolpaths. Output file as "isolate_boardname.ngc" | ||
* Then comes the joining of the three ngc files: Create a new ngc file starting with | * Then comes the joining of the three ngc files: Create a new ngc file starting with | ||