CNC-Fräse: Unterschied zwischen den Versionen

Zeile 1:

== Geil-o-mat ==

=== Current Status===

* EMC is quite configured. Max-Movement speed is approx 4200 mm/sec. Its a great device.

* Homeing procedure in EMC is functional, and by that also soft-limits. Its now "nearly" impossible to move over some limits. Start EMC, turn machine on with f1/f2, press "home all", wait 30 sec. Than traverse to the whished zero of your working coordinate system, and touch off in all three axes.

* The Spindle, aka the Kress, is switched on/off automatically.

Todo:

* Build a flat intermediate wood board 30cm^2x1cm, mill flat, so pcbs can be screwed onto in completely flat way.

* get some flat 4-5 mm wood to put underneath the actual workpeace for cutting/milling through.

* Revitalize the "Absaugung"

* Reboot the lubrication thingy.

* Find a way of dealing with oily aluminium dust.

* buy some normal wood in reasonable size (40x100x1.8 cm)

* organize soma aluminium for testing

* move the x homeswitch to the right hand side, so that larger workpieces can be used.

Ideas:

* build/buy a [http://www.vinland.com/Touch-Probe.html touch-probe.]

* Build/buy a [http://www.cnc-modellbau.net/shop/start.htm?spannmittel_vakuumtische.htm Vakuum-Table ]

* Gamepad with two analog sticks for manual movement might be a great add-on. [http://softsolder.wordpress.com/2010/03/23/logitech-dual-action-gamepad-as-emc2-pendant/ Doku]

* A [http://asset.soup.io/asset/0830/5162_2b28_960.jpeg led-ring] for illumination the milling location.

* Build a 4th, [http://www.youtube.com/watch?v=O-RzYjSPzP4&feature=related rotating axis].

--[[Benutzer:Bkubicek|Bkubicek]] 13:44, 4. Jun. 2010 (CEST)

===History===

[[Bild:Cnc_schoen.JPG|thumb|right|So eine schöne..]]