Hack-A-N900/Usb Recovery Mode: Unterschied zwischen den Versionen

@@ Zeile 1: / Zeile 1: @@
+I bricked my maemo setup several times. Often the underlying problem would have been trivial to fix, if i had a way to access the root fs. Patching bootmenu enables us to boot a minimal system with just usb network and sshd enabled. sshd will still be using settings from the root fs.
+=== Prerequisites ===
+* [http://metalab.at/wiki/Hack-A-N900/First_Steps First Steps]
+== Install bootmenu ==
+Login via ssh to your n900 and:
+<pre>
+# Get the bootmenu package package:
+wget http://www.daimi.au.dk/~cvm/bootmenu_1.6_armel.deb
+# Install bootmenu package
+dpkg -i bootmenu_1.6_armel.deb
+# Install bootmenu script
+install_bootmenu
+</pre>
+Patch bootmenu.sh to fix key bindings and enable usb recovery mode
+<pre>
+cd /
+wget http://metalab.at/wiki/images/4/40/Bootmenu_n900usbrecov.patch
+patch -p0 < Bootmenu_n900usbrecov.patch
+</pre>
+If you like you can edit /bootmenu.conf and adjust the ip address the usb interface will start with in recovery mode:
+<pre>
+# IP address for USB networking
+USB_IP=192.168.2.15
+</pre>
+== Boot into recovery mode ==
+Reboot the device with the keyboard slide out(!).
+When the boot menu appears you can either select a boot entry or press "CTRL" to boot usb recovery mode.