Fonera: Unterschied zwischen den Versionen

(8 dazwischenliegende Versionen von 4 Benutzern werden nicht angezeigt)

Zeile 1:

== FLASHING ==

=== NEW: Gargoyle Flash Fon Utility ===

Gargoyle project includes a [http://www.gargoyle-router.com/download.php Flash Fon utility] that works similarly as EasyFlash, but works on MacOSX, Linux and Windows

=== Mac OS X ===

Zeile 14:

Zeile 18:

'''2. Enable tftp'''

Alternative 1:

Get [http://ww2.unime.it/flr/tftpserver/ TFTPServer], point it to the directory that contains the firmware; it needs to be world-read/writable; you can let that program fix permissions for you.

Altenative 2: Use the tftp server which comes with Mac OS X:

<pre>

sudo launchctl load -F /System/Library/LaunchDaemons/tftp.plist

</pre>

'''3. Copy OpenWRT files to tftp dir:'''

Zeile 70:

Zeile 80:

Usage:

1. Start script: ./flashit.expect

Optionally, you can give kernel and squashfs files as parameters if they don't have the default filenames

Optionally, you can give kernel and squashfs files as parameters if they don't have the default filenames

2. Connect and power up the Fonera

3. When you see stuff happening, go for lunch.<br/

3. When you see stuff happening, go for lunch.

When the script exits (and you see no error message), you can safely reboot the box and telnet to 192.168.1.1

Zeile 113:

Zeile 123:

Danach hat der Fonero die IP 192.168.1.1 und ist über TELNET erreichbar.

Happy hacking.

=== Flashen direkt aus laufendem OpenWRT ===

Wenn OpenWRT bereits läuft kann man auch direkt auf eine neue Version updaten bzw. diese über die grade laufende Version drüber flashen.

'''ABER VORSICHT!''' Das geht nur wenn die neuen Kernel- und Dateisystemimages gleich groß oder kleiner sind als die die aktuell installiert sind, sonst ist nicht genug Platz frei! In dem Fall müssen die Partitionen ohnehin neu angelegt werden - also eine der anderen hier beschriebenen Updateroutinen verwenden!!

Zuerst per SSH einloggen, dann:

<pre>

cd /tmp

scp user@host:/path/to/openwrt-atheros-vmlinux.lzma .

scp user@host:/path/to/openwrt-atheros-root.squashfs .

mtd -e vmlinux.bin.l7 write openwrt-atheros-vmlinux.lzma vmlinux.bin.l7

mtd -e rootfs write openwrt-atheros-root.squashfs rootfs

</pre>

Danach einfach neu starten (Stecker ziehen), per Telnet einloggen und den SSH Zugang neu aktivieren (siehe unten)

=== set password after flashing ===

Zeile 125:

Zeile 151:

*****

note: after flashing, the fingerprint of the router changes. in that case ~~you can~~ delete the ~~known-hosts file~~ from ssh:

note: after flashing, the fingerprint of the router changes. in that case delete the old entry for 192.168.1.1 from your ssh known_hosts file:

rm ~/.ssh/known_hosts

[open ~/.ssh/known_hosts with your favourite editor]

[remove the line starting with 192.168.1.1]

ssh root@192.168.1.1

yes

Zeile 416:

Zeile 443:

NB! This has not been tested very well, so use with caution until it's been more quality assured.

Bugreports are welcome :)

''kyrah says:'' I've tried cloning my Fonera (running OpenWrt) using these instructions, resulting in #fail:

Looks like the rootfs_data partition is overwritten when firstboot is run. Must investigate further.

==SOFTWARE==