(15 dazwischenliegende Versionen von 3 Benutzern werden nicht angezeigt) Zeile 1:
Zeile 1: == Hardware ==
== Hardware ==
=== LINKSYS ===
{|width="100%"
|valign="top"|
* [http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1149562300349&pagename=Linksys%2FCommon%2FVisitorWrapper&lid= WRT54G Wireless-G Broadband Router With 4-Port Switch]
* [http://tinyurl.com/2jypbw User Manual] <small>[PDF]</small>
* [http://tinyurl.com/35jdwz Data Sheet] <small>[PDF]</small>
* '''WRT54G ver. 2'''
=== In Metalab ===
- S/N: CDF50D507547
The two primary routers in Metalab are also doing the FunkFeuer routing (one running OLSRd for IPv4, the other one running OLSRd2 for IPv6) .<br>
- MAC: 000F665B69F3
The connection between lab and roof is via four single mode fibres and a 4 -wire cable for 24V DC.
* '''WRT54G v 3.1''' ('''DEFEKT''')
=== On the Roof ===
- S/N: CDF90E709319
[[Datei :FunkFeuer Metalab Roof Hardware 2024.03.01.jpg|mini|Hardware inside the box as of March 2024]]
- MAC: 0014BF16DB6A
| [[Bild:WRT54G.jpg|right|thumb|220px|[http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1149562300349&pagename=Linksys%2FCommon%2FVisitorWrapper&lid= WRT54G Wireless-G LINKSYS WRT54G]]]
{| class ="wikitable "
|}
|+ Roof Hardware
=== RouterBOARD 153 - Embedded System ===
{|width="100%"
|valign="top"|
{|width="100%" border="1" <div style="font-size:-1;">
|-
|<b>Manufacturer</b>
|[http://www.mikrotik.com MikroTik]
|-
|<b>Product Page</b>
|http://www.routerboard.com/rb100.html
|-
|<b>Distributor</b>
|http://www.evonet.at/mikrotik/catalog/index.php?cPath=24
|-
|<b>CPU</b>
|MIPS32 4Kc, 175MHz embedded
|-
|<b>Memory</b>
|32MB SDRAM
|-
|<b>Boot loader</b>
|RouterBOOT, 1Mbit Flash chip
|-
|<b>Data storage</b>
|64MB onboard NAND memory chip
|-
|<b>Ethernet ports</b>
|Five 10/100 Mbit ethernet ports supporting Auto MDI/X
|-
|<b>MiniPCI slot</b>
|Three miniPCI Type IIIA/IIIB slots
|-
|<b>Speaker</b>
|present
|-
|<b>Serial ports </b>
|One DB9 RS232C asynchronous serial port
|-
|<b>LEDs</b>
|Power, 3 LED pairs for MiniPCI slots, 1 user LED
|-
|<b>Power options</b>
|11..60V DC - power jack or IEEE802.3af Power over Ethernet (12V / 48V DC, including power over datalines)
|-
|-
|<b>Power Out</b>
! Device !! "Hostname" !! Description
|Two 3V DC power output headers (only one populated by default), maximal output current - 500mA total
|-
|-
|<b>Power Consumption</b>
| hAP AC || roof -hap1 || Basically just used as a media converter with switchable PoE injector
|3-4W without extension cards. Maximum 13W
|-
|-
|<b>Dimensions</b>
| hAP AC || roof-hap2 || Basically just used as a media converter with switchable PoE injector
|160mm x 160mm (6.3in x 6.3in)
|-
|-
|<b>Weight</b>
| wAP 60G ||roof-metalab-la12 || Link to la12
|183g (6.5oz)
|-
|-
|<b>Temperature</b>
| NBE -M5 -16 || ? || Old link to wrkch. Will be removed once 60GHz link is active
|Operational: -20°C to +70°C (-4°F to 158°F)
|-
|-
|<b>Humidity</b>
|Cube 60Pro AC
|Operational: 70% relative humidity (non-condensing)
|roof -metalab -wrkch
|-
|Link to wrkch
|<b>Supported OS</b>
|RouterOS, GNU/Linux
|-
|<b>Documentation</b>
|[http://www.routerboard.com/pdf/rb153ugB.pdf Users Manual] [http://www.routerboard.com/pdf/rb153mA.pdf Startup Guide]
|-
|<b>Unit Dimensions</b>
|[http://www.routerboard.com/pdf/RB153_dim.pdf PDF] [http://www.routerboard.com/pdf/RB153_dim.DXF DXF]
|-
|<b>Case Dimensions</b>
|[http://www.routerboard.com/pdf/rb153_case.pdf PDF] [http://www.routerboard.com/pdf/rb153_case.zip DXF]
|-
|<b>Firmware Upgrade</b>
|[http://www.routerboard.com/files/rb-2.8/adm5120-2.8.fwf 2.8] [http://www.routerboard.com/files/rb-2.8/CHANGELOG Changes]
|}
|}
The idea behind the current setup is to have no single point of failure on the roof as we can not access it immediately in case of any equipment malfunction .
|valign="top"|<br />[[Bild:RB153.jpg|right|thumb|220px|[http://www.routerboard.com/rb100.html RouterBOARD R153]]]
|}
=== RouterBOARD R52 - 2.4/5GHz 802.11a+b+g Wireless Mini-PCI Card ===
{|width="100%"
|valign="top"|
{|width="100%" border="1" <div style="font-size:-1;">
|-
|<b>Manufacturer</b>
|[http://www.mikrotik.com MikroTik]
|-
|<b>Product Page</b>
|http://www.mikrotik.com/pdf/R52.pdf
|-
|<b>Distributor</b>
|http://www.evonet.at/mikrotik/catalog/product_info.php?cPath=23&products_id=34
|-
|}
<br />
=== SanDisk 1.0 GB CompactFlash ===
EUR 19,90 (kleinere Memory Card gabs beim nahen [http://niedermeyer.at/ Niedermeyer] nicht
|[[Bild:R52.jpg|right|thumb|220px|[http://www.mikrotik.com/pdf/R52.pdf RouterBOARD R52]]]
|}
=== Passendes Gehäuse PC 21/18-FC3 für Routerboard ===
* robuster ABS Kunststoff
* Schutzart: IP 65
* (B x H x T) 185 x 213 x 102 mm
* [[:Bild:Conrad.at-Reglergehaeuse.png|Snapshot der Produktseite]] zum REGLERGEHÄUSE PC 21/18-FC3 bei Conrad.at (Best.Nr. 524063)
* [http://www2.produktinfo.conrad.com/datenblaetter/500000-524999/524063-da-01-en-REGLERGEHAEUSE_PC_21_18-C_FC_II.pdf Datenblatt]
== Software ==
<br />
<br />
__NOTOC__
__NOTOC__
Hardware In Metalab The two primary routers in Metalab are also doing the FunkFeuer routing (one running OLSRd for IPv4, the other one running OLSRd2 for IPv6).
On the Roof Hardware inside the box as of March 2024
Roof Hardware
Device
"Hostname"
Description
hAP AC
roof-hap1
Basically just used as a media converter with switchable PoE injector
hAP AC
roof-hap2
Basically just used as a media converter with switchable PoE injector
wAP 60G
roof-metalab-la12
Link to la12
NBE-M5-16
?
Old link to wrkch. Will be removed once 60GHz link is active
Cube 60Pro AC
roof-metalab-wrkch
Link to wrkch
The idea behind the current setup is to have no single point of failure on the roof as we can not access it immediately in case of any equipment malfunction.
