FunkFeuer-Node/Komponenten: Unterschied zwischen den Versionen

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
K
(Update roof hardware)
 
(2 dazwischenliegende Versionen von einem anderen Benutzer werden nicht angezeigt)
Zeile 1: Zeile 1:
 
== Hardware ==
 
== Hardware ==
  
−
=== Update ===
 
  
−
Das RouterBOARD 153 ist bezügl. OpenWRT und  Atheros nicht optimal unterstützt und steht unter zu hoher Last. Der geplante Update des Knotens erfolgt mit
+
=== In Metalab ===
 +
The two primary routers in Metalab are also doing the FunkFeuer routing (one running OLSRd for IPv4, the other one running OLSRd2 for IPv6).<br>
 +
The connection between lab and roof is via four single mode fibres and a 4-wire cable for 24V DC.
  
−
* http://ubnt.com/products/bullet.php
+
=== On the Roof ===
−
* http://www.ubnt.com/downloads/b2_datasheet.pdf
+
[[Datei:FunkFeuer Metalab Roof Hardware 2024.03.01.jpg|mini|Hardware inside the box as of March 2024]]
−
* http://wiki.funkfeuer.at/index.php/UBNT_Bullet2
 
  
−
und [[Switch mit PoE|einem kleinen Switch]] im bestehenden Gehäuse. Dadurch werden die HF-kritischen PigTails wegrationalisiert.
+
{| class="wikitable"
−
 
+
|+ Roof Hardware
−
Zusätzlich wird versucht, einen 5 GHz-Link mittels einer Nanostation NS5 zu errichten.
 
−
 
 
−
* http://ubnt.com/products/nano.php
 
−
* http://www.ubnt.com/downloads/ns5_datasheet.pdf
 
−
 
 
−
=== RouterBOARD 153 - Embedded System ===
 
−
{|width="100%"
 
−
|valign="top"|
 
−
 
 
−
{|width="100%" border="1" <div style="font-size:-1;">
 
−
|-
 
−
|<b>Manufacturer</b>
 
−
|[http://www.mikrotik.com MikroTik]
 
−
|-
 
−
|<b>Product Page</b>
 
−
|http://www.routerboard.com/rb100.html
 
−
|-
 
−
|<b>Distributor</b>
 
−
|http://www.evonet.at/mikrotik/catalog/index.php?cPath=24
 
−
|-
 
−
|<b>CPU</b>
 
−
|MIPS32 4Kc, 175MHz embedded
 
−
|-
 
−
|<b>Memory</b>
 
−
|32MB SDRAM
 
−
|-
 
−
|<b>Boot loader</b>
 
−
|RouterBOOT, 1Mbit Flash chip
 
−
|-
 
−
|<b>Data storage</b>
 
−
|64MB onboard NAND memory chip
 
−
|-
 
−
|<b>Ethernet ports</b>
 
−
|Five 10/100 Mbit ethernet ports supporting Auto MDI/X
 
−
|-
 
−
|<b>MiniPCI slot</b>
 
−
|Three miniPCI Type IIIA/IIIB slots
 
−
|-
 
−
|<b>Speaker</b>
 
−
|present
 
−
|-
 
−
|<b>Serial ports </b>
 
−
|One DB9 RS232C asynchronous serial port
 
−
|-
 
−
|<b>LEDs</b>
 
−
|Power, 3 LED pairs for MiniPCI slots, 1 user LED
 
 
|-
 
|-
−
|<b>Power options</b>
+
! Device !! "Hostname" !! Description
−
|11..60V DC - power jack or IEEE802.3af Power over Ethernet (12V / 48V DC, including power over datalines)
 
 
|-
 
|-
−
|<b>Power Out</b>
+
| ER-X-SFP || DACH1 || Basically just used as a media converter with switchable PoE injector
−
|Two 3V DC power output headers (only one populated by default), maximal output current - 500mA total
 
 
|-
 
|-
−
|<b>Power Consumption</b>
+
| ER-X-SFP || DACH2 || Basically just used as a media converter with switchable PoE injector
−
|3-4W without extension cards. Maximum 13W
 
 
|-
 
|-
−
|<b>Dimensions</b>
+
| NBE-5AC-19 || ? || Link to Kryptaroof, should be replaced by 60GHz
−
|160mm x 160mm (6.3in x 6.3in)
 
 
|-
 
|-
−
|<b>Weight</b>
+
| NBE-M5-16 || ? || Backup link to wrkch, pretty old hardware
−
|183g (6.5oz)
 
−
|-
 
−
|<b>Temperature</b>
 
−
|Operational: -20&deg;C to +70&deg;C (-4&deg;F to 158&deg;F)
 
−
|-
 
−
|<b>Humidity</b>
 
−
|Operational: 70% relative humidity (non-condensing)
 
−
|-
 
−
|<b>Supported OS</b>
 
−
|RouterOS, GNU/Linux
 
−
|-
 
−
|<b>Documentation</b>
 
−
|[http://www.routerboard.com/pdf/rb153ugB.pdf Users Manual] [http://www.routerboard.com/pdf/rb153mA.pdf Startup Guide]
 
−
|-
 
−
|<b>Unit Dimensions</b>
 
−
|[http://www.routerboard.com/pdf/RB153_dim.pdf PDF] [http://www.routerboard.com/pdf/RB153_dim.DXF DXF]
 
−
|-
 
−
|<b>Case Dimensions</b>
 
−
|[http://www.routerboard.com/pdf/rb153_case.pdf PDF] [http://www.routerboard.com/pdf/rb153_case.zip DXF]
 
−
|-
 
−
|<b>Firmware&nbsp;Upgrade</b>
 
−
|[http://www.routerboard.com/files/rb-2.8/adm5120-2.8.fwf 2.8] [http://www.routerboard.com/files/rb-2.8/CHANGELOG Changes]
 
 
|}
 
|}
  
 +
The idea behind the current setup is to have no single point of failure on the roof as we can not access it immediately in case of any equipment malfunction.
  
−
|valign="top"|<br />[[Bild:RB153.jpg|right|thumb|220px|[http://www.routerboard.com/rb100.html RouterBOARD R153]]]
+
__NOTOC__
−
|}
 
−
 
 
−
=== RouterBOARD R52 - 2.4/5GHz 802.11a+b+g Wireless Mini-PCI Card ===
 
−
{|width="100%"
 
−
|valign="top"|
 
−
 
 
−
{|width="100%" border="1" <div style="font-size:-1;">
 
−
|-
 
−
|<b>Manufacturer</b>
 
−
|[http://www.mikrotik.com MikroTik]
 
−
|-
 
−
|<b>Product Page</b>
 
−
|http://www.mikrotik.com/pdf/R52.pdf
 
−
|-
 
−
|<b>Distributor</b>
 
−
|http://www.evonet.at/mikrotik/catalog/product_info.php?cPath=23&products_id=34
 
−
|-
 
−
|}
 
−
 
 
−
 
 
−
<br />
 
−
=== SanDisk 1.0 GB CompactFlash ===
 
−
 
 
−
EUR 19,90 (kleinere Memory Card gabs beim nahen [http://niedermeyer.at/ Niedermeyer] nicht)
 
−
 
 
−
|[[Bild:R52.jpg|right|thumb|220px|[http://www.mikrotik.com/pdf/R52.pdf RouterBOARD R52]]]
 
−
|}
 
−
 
 
−
=== Passendes Gehäuse PC 21/18-FC3 für Routerboard ===
 
−
 
 
−
* robuster ABS Kunststoff
 
−
* Schutzart: IP 65
 
−
* (B x H x T) 185 x 213 x 102 mm
 
−
 
 
−
* [[:Bild:Conrad.at-Reglergehaeuse.png|Snapshot der Produktseite]] zum REGLERGEHÄUSE PC 21/18-FC3 bei Conrad.at (Best.Nr. 524063)
 
−
* [http://www2.produktinfo.conrad.com/datenblaetter/500000-524999/524063-da-01-en-REGLERGEHAEUSE_PC_21_18-C_FC_II.pdf Datenblatt]
 
−
 
 
−
 
 
−
{|width="100%"
 
−
|valign="top"|
 
−
|
 
−
=== Panel Antenne Ant 16 bg Set ===
 
−
 
 
−
* 2 x WLAN-Panel-Antenne 16 dBi für 802.11 b und g, N-Buchse
 
−
* Lieferant: http://www.datennetz.at/
 
−
* [http://nr07624.vhost-enzo.sil.at/product_info.php/products_id/272 Datenblatt]
 
−
* [[:Bild:Ant Panel 16bg Set.pdf|lokale Kopie]] <small>[PDF]</small>
 
−
 
 
−
=== Omnidirektionale Antenne ===
 
−
 
 
−
* N-Buchse
 
−
 
 
−
=== Pig-Tails ===
 
−
 
 
−
* 3 x 1,5 m HDF 200 Low Loss Antennenkabel 0,54 dB / m @ 2,4 GHz
 
−
* mit je 2 Stk. N ST HDF 200 C  N-Stecker Crimp-Version
 
−
|
 
−
[[Bild:Omni.jpg|right]]
 
−
|[[Bild:Ant 16bg.jpg|right|thumb|220px|[http://nr07624.vhost-enzo.sil.at/product_info.php/products_id/272 Ant Panel 16 bg Set]]]
 
−
|}
 
−
 
 
−
== Software ==
 
  
 
[[Kategorie:Netzwerk]]
 
[[Kategorie:Netzwerk]]
 
[[Kategorie:0xFF]]
 
[[Kategorie:0xFF]]
−
 
−
__NOTOC__
 

Aktuelle Version vom 28. September 2024, 15:24 Uhr

Hardware

In Metalab

The two primary routers in Metalab are also doing the FunkFeuer routing (one running OLSRd for IPv4, the other one running OLSRd2 for IPv6).
The connection between lab and roof is via four single mode fibres and a 4-wire cable for 24V DC.

On the Roof

Hardware inside the box as of March 2024
Roof Hardware
Device "Hostname" Description
ER-X-SFP DACH1 Basically just used as a media converter with switchable PoE injector
ER-X-SFP DACH2 Basically just used as a media converter with switchable PoE injector
NBE-5AC-19 ? Link to Kryptaroof, should be replaced by 60GHz
NBE-M5-16 ? Backup link to wrkch, pretty old hardware

The idea behind the current setup is to have no single point of failure on the roof as we can not access it immediately in case of any equipment malfunction.

Abgerufen von „https://metalab.at/wiki/index.php?title=FunkFeuer-Node/Komponenten&oldid=78327“