Lounge

empty space, threatening void

Declassified Information (written by the machines)

The Moth War, also known as the Metalab Moth Infestation, was a conflict that occurred at the hackerspace metalab in the second half of 2022. The war was sparked by a sudden influx of moths in the lounge area, causing concern among the members of metalab.

The first line of response was led by Lt. [REDACTED] and Maj. Gen. [REDACTED], who implemented a scorched earth policy of removing and destroying all upholstered furniture in the lounge. This initial action was successful in reducing the number of moths, but it also left the lounge area barren and unusable.

In an effort to further combat the infestation, Pvt. [REDACTED] initiated a biological warfare campaign, releasing ichneumonids, predatory insects, into the lounge, and while it was initially successful in reducing the moth population, the moths quickly adapted and the campaign was ultimately fruitless.

Faced with a growing moth population, Maj. Gen. [REDACTED] decided to escalate the conflict by implementing a full-on chemical warfare campaign. Using powerful pesticides, she was able to eradicate the majority of the moths, finally bringing the war to a successful end.

The lounge area was left in a state of disarray, with many members expressing concern over the potential health and environmental effects of the chemical warfare campaign. Despite these concerns, the members of metalab were determined to rebuild the lounge, with the goal of creating a space that was even better than before.

As of now, the lounge is still in the early stages of renovation, with members working tirelessly to rebuild and improve the space. In the aftermath of the Moth War, metalab implemented stricter policies for pest control, ensuring that such an infestation would never occur again. The lounge is expected to reopen in the near future, with many members looking forward to enjoying the newly renovated space.

The Moth War serves as a cautionary tale of the potential consequences of allowing pests to go unchecked, and the importance of taking swift and decisive action in the face of such a threat.

Current State of the Lounge

ReLounge

Use Cases

• video consumption
• audio consumption
• video games
• quick in/out hopping (Spaziergang time)
• slacking
• laptop time
• board games
• jamming

Requirements

1. accessibility
   1. door width
   2. ladder access
   3. furniture arrangement (seating / tables)
2. cozyness
   1. furniture type
   2. lighting mood
3. versatility
   1. light mood sellectivity
   2. audio setup connectivity
   3. table surface accesssibility
4. grind-resistance
   1. seamless floor

Implementation

0% -> ready to start

1-99% -> in progress

✅ -> done

todo

Item	known unknowns	Responsible	✅
remove garbage			✅
move equipment out	where can the equipment be stored ?		✅
tear down electricals & network	garbage management		✅
tear down ladders & wood paneling behind them			✅
disconnect & remove lounge radiator			✅
remove wet (moldy?) street-side plaster			✅
remove rubble			✅
clean up brick dust			✅
tear out floor			✅
remove lower border of street-side plaster			✅
bring floor-components and other trash to relevant mistplatz			✅
cut out old electrics as close to walls as possible			✅
widen door	gains/feasability/risks for accessibility improvements	ripper	10%
flatten historical floor			✅
remove floor dust (the sooner the better)	special equipment needed ?		✅
fill up gaps under walls / wooden "cable tray" (the sooner the better)		ncl	✅
build a concrete slide to get concrete from the truck into the lounge (needs a few wood sheets, 1-2 days before betondown at the latest )		ripper	✅
organize tools (Abziehlatte, 3 Shovels, kellen, wood sheet to walk on drying beton)		ripper	✅
clear the corner in the main room, place plastic tarp, make a dirt-schleuse (1-2 days before betondown at the latest)			✅
cover walls with tarp to protect them from concrete splashes (the sooner the better)			✅
Parkplatz vor dem Lab blockieren	Mit MA reden, beantragen, etc.	piro	✅
order the concrete		ripper	✅
pour new floor		ripper	✅
Fill holes in new floor	Use some Nivelliermasse	ncl, lasi, ... (you?), thx to ripper for explanation	✅
Flatten/grind down high spots on new floor	rent a grinding machine? https://www.boels.com/de-at/mieten/betonschleifmaschine-1-scheibe/p/15209
replaster wall(s) ?	yes / no
paint walls
lay new floor	Which floor (Laminat/PVC/Epoxy??)
decide on room layout	ladders / seating / eqipment
rebuild ladders	ladder requirements, ladder design
rebuild electricals using Kabeltrassen	requirements
rebuild networking using Kabeltrassen	requirements
rebuild lighting
acquire furniture
redo lounge setup	requirements

Floor

Estrichaktion 2024-03-07

tnx an ripper, ncl, Felix, becca, piro, amalia, neuron und alle anderen die dabei geholfen haben

Auffüllen&Schleifen

Der Boden ist sooo schief (Daten aus Datei:Lounge.xlsx):

Daher:

1. Löcher mit Ausgleichsmasse/Nivellierspachtel auffüllen (wurde am 22.05.2024 erledigt)
2. Boden Schleifen

Mit etwas Glück sollte der Boden nicht mehr als 1 bis 1,5cm schief von der Tür bis zur Galaxiwand sein. Und dabei gerade von Rathausstraße zum Blinkentunnel sein.

Boden Fräsen Freitag 11.-Montag 14. Oktober 2024

Wir müssen eine Fräse ausborgen, ins Metalab bringen, fräsen und das Gerät zurück bringen.

• Fräse Reserviert (done)
• Abholung Freitag ab 14:00 - 17:00 (offen)
• Schleifen am Fr. und/oder Samstag (und/oder Sonntag?) - offen
• Zurückbringen am Montag vor 8:00 (offnet um 7:00) (offen)

Den Orga Hut trägt Sonstwer

Wer ist dabei

Freitag: Es braucht 1 Auto, eine Person mit Führerschein und Personen, die beim Ein- und Ausladen zu helfen

• Dein Name - Deine Mithilfmöglichkeit

Samstag: Es braucht mindestens ca 4 Personen, die mithelfen das Gerät zu bedienen

• Zoe
• Dein Name
• Dein Name
• Dein Name
• Dein Name

Sonntag: Wir hoffen am Samstag schon fertig zu werden, aber falls nicht:

• Zoe
• Dein Name
• Dein Name
• Dein Name
• Dein Name

Auch braucht es Hilfe beim Rückverladen in ein Transportfahrzeug

Montag:

Wir brauchen eine*n Held*in, der/die das Gerät bis 8 Uhr früh zurück bringen kann (frühestens 7 Uhr)

• Dein Name
• Dein Name
• Dein Name
• Dein Name

Adresse: Boels Maschinenverleih Österreich GmbH Wien - Brunn am Gebirge Johann-Steinbock-Str. 14 2345 Brunn am Gebirge Tel +43 (0)2236-312460 Depot.327@boels.at

Auftragsnummer: 3270124114

Boden eben

der Boden sollte eben sein, und eingermassen auf gleicher Höhe wie der Boden der Bib, damit wir einen Barrierearmen Boden haben wenn wir irgendwann den Hauotraumboden neu gemacht haben...

Das Problem dabei ist, dass der historische Estrich sehr uneben und teilweise sehr knapp am niveau der Bib dran (oder sogar knapp drüber) ist.

Höchster Punkt	Bib +1 cm	einzelne Punkte, wegstemmen, rot markiert
Höchste Fläche	Bib -2 cm
Durchschnitt	Bib -3.5 cm
Niedrigster Punkt	Bib -6 cm

Serviervorschlag 2

Estrichboden

Abschätzung Beton/Estrich der rein muss:

• Grundfläche von 5,3x4,03m --> 21,36m²
• Mittlere Dicke ca. 7cm --> 1,5m³ Beton
• Estrichbeton von Obi hat eine Dichte von 2000kg/m³ --> 3000kg Estrich
• --> 75 Säcke á 4€ --> 300€ für Estrich

Serviervorschlag 1

Lounge Grundfläche ca. 22 m²

Bodenauswahl bei obi

15-30 euro / m² stark beanspruchbares Laminat bei Obi -> ca 330-660 euro bodenlaminat (9mm?)

2 - 4 € /m² "laminatunterlage" bei OBI -> 44 - 88 € / 22m²

darunter spanplatten platte bei obi -> ca 374,- / 22m²

eventuell noch quertráger austauschen/erweitern

bodenaufbau historisch

querträger alle ca 50cm, ein bissl festgeestriccht

darauf schaumstoffbahnen

darauf spanplatten ca 22mm

darauf trittschutz ca 1-2mm blauer kram

darauf laminat ca 9mm

Electrics

lol.