HDMI whisperer: Unterschied zwischen den Versionen

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
(added consultant)
Zeile 11: Zeile 11:
 
}}
 
}}
  
 +
 +
==What==
 
Our HDMI switches provide only a classic infrared remote control, to control them via the [[Slackomatic]] we will replace the infrared
 
Our HDMI switches provide only a classic infrared remote control, to control them via the [[Slackomatic]] we will replace the infrared
 
receiver with a few wav files and a small custom built amplifier.
 
receiver with a few wav files and a small custom built amplifier.
  
 +
==How==
 +
The [LINK]  cheap chinese HDMI switch we got has an IR remote control that comes with a 3.5mm audio connector to plug in a cape with a TSOP383.
 +
 +
This receiver was plugged into the audio port of a Laptop and the generated audio was captured.
 +
 +
That gave us 5 different Audio files.
 +
 +
The files were post-edited using ?? and now we can simply play them and aattch the audio out from the raspberry pi directly to the HDMI switch IR receiver port with a small piece of voltage converter logic inn between.
 +
 +
 +
 +
==Data==
 
Wav files with the recoded ir commands:
 
Wav files with the recoded ir commands:
 
# [[:Datei:Input_hdmi1.wav|HDMI 1]]
 
# [[:Datei:Input_hdmi1.wav|HDMI 1]]
Zeile 20: Zeile 34:
 
# [[:Datei:Input_hdmi4.wav|HDMI 4]]
 
# [[:Datei:Input_hdmi4.wav|HDMI 4]]
 
# [[:Datei:Input_hdmi5.wav|HDMI 5]]
 
# [[:Datei:Input_hdmi5.wav|HDMI 5]]
 +
 +
 +
==Schematic==
  
 
Circuit (n.b: the input is actually 3.3V instead of the shown 5V):
 
Circuit (n.b: the input is actually 3.3V instead of the shown 5V):
  
 
[[Datei:Wandlerumgs.jpg|miniatur,left]]
 
[[Datei:Wandlerumgs.jpg|miniatur,left]]

Version vom 22. November 2015, 11:30 Uhr

Language: English
Subpages:
HDMI_whisperer hat keine Unterseiten.



HDMI whisperer
No-Logo.png
Gestartet: 21.11.2015
Involvierte: User:Phaer User:m68k User:Pk
Status: active
Beschreibung: It's a custom built remote control interface for our cheap chinese HDMI switches
Shutdownprozedur:
Zuletzt aktualisiert: 21.11.2015


What

Our HDMI switches provide only a classic infrared remote control, to control them via the Slackomatic we will replace the infrared receiver with a few wav files and a small custom built amplifier.

How

The [LINK] cheap chinese HDMI switch we got has an IR remote control that comes with a 3.5mm audio connector to plug in a cape with a TSOP383.

This receiver was plugged into the audio port of a Laptop and the generated audio was captured.

That gave us 5 different Audio files.

The files were post-edited using ?? and now we can simply play them and aattch the audio out from the raspberry pi directly to the HDMI switch IR receiver port with a small piece of voltage converter logic inn between.


Data

Wav files with the recoded ir commands:

  1. HDMI 1
  2. HDMI 2
  3. HDMI 3
  4. HDMI 4
  5. HDMI 5


Schematic

Circuit (n.b: the input is actually 3.3V instead of the shown 5V):

miniatur,left