Vusbmicro

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Version vom 1. Juli 2012, 21:14 Uhr von Tessellated (Diskussion | Beiträge) (→‎Links)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Zur Navigation springenZur Suche springen

wtf?

The vusbmicro is a tiny vusb platform that features

  • a prototyping area
  • an ICSP connector
  • two metalab logos (one hidden under the IC)
  • a hole so you can hang it around your neck
  • a QRcode with a link to the instructions


You can buy a kit from me containing all parts for the project on the hackerspaceshop.com or personally when we meet in real life around the lab ;)


Hardware

The schematics are available on github.

Its pretty straight forward, cheap and fast to build.

If you want to make your own make sure to use a 2mm PCB and apply some solder to the usb conector pads.

Software

The device features an ATTINY45/85 IC and runs a firmware built around cs's virtual usb library.

It can be used as an ISP for AVR or alternatively as a keyboard device or anythong else you can implement with vusb.

So far we have firmwares ready for ISP and a prankster device called TrustMe that periodically sends a Capslock to the host once connected.


About

The project started out as powertomato wanted a small ISP board that he could build from components available in metalabs own Bauteilsortiment as the programmers tend to get lost.

From there we had 2 iterations of designs and ideas and together with overflo, clifford designed the version 0.9 of the PCB.

Links



beauty and the beast
board design
schematic