Umbrella: Unterschied zwischen den Versionen

aus Metalab, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Wechseln zu: Navigation, Suche
(qlc+ setup how)
(bunte schirme ++)
Zeile 1: Zeile 1:
 +
[[Datei:Buntschirm.jpg|miniatur]]
 
[[Datei:u_blue.jpg|miniatur]]
 
[[Datei:u_blue.jpg|miniatur]]
 
[[Datei:u_pink.jpg|miniatur]]
 
[[Datei:u_pink.jpg|miniatur]]
 +
 
==Why==
 
==Why==
  

Version vom 17. Mai 2017, 23:02 Uhr

Buntschirm.jpg
U blue.jpg
U pink.jpg

Why

The metalab needs some new lights.

ART-net is awesome.


How

Raspberry Pi 3 + Touchscreen

Distro based on the QLC+ image (raspbian jessie)

QLC+ X-server less build that renders directly in GL buffers for performance

H801 based clients (ESP8266)

Arduino based firmware that implements ART-net


Temporary setup with QLC+

Connect to "metalights" WLAN

Set OUTPUT to 10.20.255.255

Set ARTnet uiniverse to 3

There are 5 channels / Umbrella

R,G,B,WW,CW

If CW or WW are anything else but "0" R,G and B are disabled by firmware

If R,G or B are anything but "0" CW and WW are disabled by firmware

This is to save our powersupplies from sudden heat death.

(105 watt / Umbrella max)


Hardware

H801 Ledcontroller features:

  • 8 Mbit Storage (1 Mb)
  • 5 channels each 45 watt max (~ 3.5 Ampere @ 12 V / channel)


How to flash

  • Install Arduino 1.6.4
  • Install ESP 8266 extensions
  • Select Tools:
    • GENERIC ESP8266 Module
    • Flash Mode DIO
    • Flash Size 1M (512K SPIFFS)
    • Debug Port: Disabled
    • Debug Level: none
    • Reset Mode: ck
    • Flash Frequency: 40 Mhz
    • CPU Frequency: 80 Mhz
    • Upload Speed 115200 or more


  • Set JUMPER on board to boot into flash mode
  • Power the board

Who

Originally invented and built by overflo, the umbrellas were built by a lot of people at some nightshifts at metalab

LOTS OF SUPPORT BY uniq, anlumo, ripper, bogdan <your name here>

Links

QLC+

H801 Controllers

Github

ART-net Reference

Artnet