Umbrella: Unterschied zwischen den Versionen

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
Zeile 64: Zeile 64:
  
 
=== How to flash ===
 
=== How to flash ===
* Arduino 1.6.4
+
* Install Arduino 1.6.4
* ESP 8266 extensions
+
* Install ESP 8266 extensions
 
* Select Tools:
 
* Select Tools:
 
** GENERIC ESP8266 Module
 
** GENERIC ESP8266 Module
Zeile 78: Zeile 78:
  
  
 
+
* Set JUMPER on board to boot into  flash mode
 
+
* Power the board
  
 
==Who==
 
==Who==

Version vom 22. Dezember 2016, 17:07 Uhr

infos zum metalights projekt.


Why

The metalab needs some new lights.

ART-net is the name of the game.


How

Raspberry Pi 3

Distro based on the QLC+ image (raspbian jessie)

Hostapd for Accesspoint mode

QLC+ X-server less build that renders directly in GL buffers for performance

H801 based clients (ESP8266)

Arduino based firmware that implements ART-net


Costs

One time costs:

  • 1 Switch 3,-
  • 30 meter cable
  • 1 Raspberry Pi 3
  • 1 SD card
  • 1 7" Touch screen
  • Acrylic case


Per umbrella device:

  • 1 umbrella 24,-
  • 1 H801 10,-
  • 1 Power supply 12V 18,-
  • RGB ledstripes 5-20,-
  • COLDWHITE ledstripes 5-20,-
  • WARMWHITE ledstripes 5-20,-
  • 3D-printed parts for mounting
  • Lasercut parts for mounting

TOTAL 70,- to 100,- / umbrella

We need at least 12 at most 20 pcs

The more umbrellas the less leds / umbrella are nedded

A similar setup from a professional light company would cost >10k so this is actually very cheap in comparsion to commercially available solutions.

Hardware

H801 Ledcontroller features:

  • 8 Mbit Storage (1 Mb)
  • 5 channels each 45 watt max (~ 3.5 Ampere @ 12 V / channel)


How to flash

  • Install Arduino 1.6.4
  • Install ESP 8266 extensions
  • Select Tools:
    • GENERIC ESP8266 Module
    • Flash Mode DIO
    • Flash Size 1M (512K SPIFFS)
    • Debug Port: Disabled
    • Debug Level: none
    • Reset Mode: ck
    • Flash Frequency: 40 Mhz
    • CPU Frequency: 80 Mhz
    • Upload Speed 115200 or more


  • Set JUMPER on board to boot into flash mode
  • Power the board

Who

Originally invented and built by overflo, the project is now maintained by:

<insert name here>

Please contact anyone from the list above for questions regarding the metalabs light setup.



Links

QLC+

H801

Github

ART-net Reference