Slackomatic: Unterschied zwischen den Versionen

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
(added HDMI and audio jack)
(added github link)
(7 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 4: Zeile 4:
 
|startdate=10.11.2013
 
|startdate=10.11.2013
 
|status=in production but still in progress
 
|status=in production but still in progress
|wtf=control the Yamaha AV system and projector using a web page.
+
|wtf=control the Yamaha AV system, our Moderately Huge Screen and projector using a web page.
 
|lastupdate=
 
|lastupdate=
 
|hidden=false
 
|hidden=false
 
}}
 
}}
 
== WTF ==
 
== WTF ==
control the Yamaha AV system and projector using a web page.
+
control the Yamaha AV system, our [[MHS]] and projector using a web page.
  
 
where? http://10.20.30.90
 
where? http://10.20.30.90
 +
 +
source on github: https://github.com/sixtyeight/slackomatic
  
 
== Current state ==  
 
== Current state ==  
  
* you can select between the [[Screeninvader]], PS2, PS3, Wii and one spare HDMI cable (labeled "My HDMI Port") for your own device.
+
* you can select between the [[Screeninvader]], PS2, PS3, Wii and one spare HDMI cable (labeled "My HDMI Port") and a Phillips Bluetooth "Headset".
* projector and yahama are now connected with a shiny new HDMI cable
+
* projector, tv screen and yahama are now connected with a shiny new HDMI cable (and an HDMI splitter to display the same on the TV and projector)
  
 
== Known issues ==
 
== Known issues ==
 
<strike>* change to the invader can fail sometimes (change of the projector input source), please try again after a few seconds.</strike>
 
<strike>* change to the invader can fail sometimes (change of the projector input source), please try again after a few seconds.</strike>
 +
 
<strike>* video quality on Wii and PS3 is a little bit sub-par (needs a new cable between the Yamaha and the projector).</strike>
 
<strike>* video quality on Wii and PS3 is a little bit sub-par (needs a new cable between the Yamaha and the projector).</strike>
  
Zeile 27: Zeile 30:
 
== Todo ==
 
== Todo ==
 
* Documentation
 
* Documentation
* Githubify
+
* <strike>Githubify</strike>
 
* Cabling diagram
 
* Cabling diagram
  
Zeile 35: Zeile 38:
 
* PS3: Audio, Video: HDMI -> Yamaha
 
* PS3: Audio, Video: HDMI -> Yamaha
 
* Wii: Audio, Video: AV -> Yamaha
 
* Wii: Audio, Video: AV -> Yamaha
* one audio cable to connect with your own device (Klinke/audio jack 3.5mm) -> Yamaha  
+
* a Phillips Bluetooth audio "headset" for connecting with your portable device -> Yamaha  
 
* one HDMI cable to connect with your own device -> Yamaha
 
* one HDMI cable to connect with your own device -> Yamaha
 
* Slackomatic: no Audio, Video; connected via USB/RS232 to the projector as the remote control; sends XML to the yamaha via network (wired)
 
* Slackomatic: no Audio, Video; connected via USB/RS232 to the projector as the remote control; sends XML to the yamaha via network (wired)
* Yamaha: video output connected to the projector via <strike>AV</strike> HDMI, audio output to our surround speakers
+
* Yamaha: video output connected to the TV and projector via <strike>AV</strike> HDMI (+HDMI Splitter), audio output to our surround speakers
  
 
== Hardware / Software ==
 
== Hardware / Software ==
 
* Raspbery Pi with Raspian Image (Debian)
 
* Raspbery Pi with Raspian Image (Debian)
* Slackomatic frontend itself is written in Java and runs in Jetty, the hardware control stuff is Shell :D
+
* Slackomatic frontend itself is written in Java and runs in Jetty, the hardware control stuff is Shell (mostly, may contain traces of Java now) :D
  
 
== Everybody loves screenshots ==
 
== Everybody loves screenshots ==

Version vom 27. Juni 2014, 21:57 Uhr


Slackomatic
Slackomatic.png
Gestartet: 10.11.2013
Involvierte: User:M68k
Status: in production but still in progress
Beschreibung: control the Yamaha AV system, our Moderately Huge Screen and projector using a web page.
Shutdownprozedur:
Zuletzt aktualisiert: 2014-06-27

WTF

control the Yamaha AV system, our MHS and projector using a web page.

where? http://10.20.30.90

source on github: https://github.com/sixtyeight/slackomatic

Current state

  • you can select between the Screeninvader, PS2, PS3, Wii and one spare HDMI cable (labeled "My HDMI Port") and a Phillips Bluetooth "Headset".
  • projector, tv screen and yahama are now connected with a shiny new HDMI cable (and an HDMI splitter to display the same on the TV and projector)

Known issues

* change to the invader can fail sometimes (change of the projector input source), please try again after a few seconds.

* video quality on Wii and PS3 is a little bit sub-par (needs a new cable between the Yamaha and the projector).

Goal

  • support all the other stuff in the lounge (Kouch, Metacade et al.). those will be added when the necessary cabling is available.

Todo

  • Documentation
  • Githubify
  • Cabling diagram

Tell me more, how is it setup right now(tm)

  • Screeninvader: Audio, Video: HDMI -> Yamaha
  • PS2: Audio, Video: AV -> Yamaha
  • PS3: Audio, Video: HDMI -> Yamaha
  • Wii: Audio, Video: AV -> Yamaha
  • a Phillips Bluetooth audio "headset" for connecting with your portable device -> Yamaha
  • one HDMI cable to connect with your own device -> Yamaha
  • Slackomatic: no Audio, Video; connected via USB/RS232 to the projector as the remote control; sends XML to the yamaha via network (wired)
  • Yamaha: video output connected to the TV and projector via AV HDMI (+HDMI Splitter), audio output to our surround speakers

Hardware / Software

  • Raspbery Pi with Raspian Image (Debian)
  • Slackomatic frontend itself is written in Java and runs in Jetty, the hardware control stuff is Shell (mostly, may contain traces of Java now) :D

Everybody loves screenshots

Slackomatic ui.png