Salami Rocket

aus Metalab, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Wechseln zu: Navigation, Suche


Hybrid rocket propulsion system conceptual overview


I chose N2O over O2 because although N2O carries a lot of conjectural inert nitrogen (64%) oxygen is much harder to handle (tank filling, storage & injection). Additionally the nitrogen, though not participating in combustion, raises the fuel erosion rate and cooles the nozzle enough to reuse it many times. Since the alternatives i found are quite expensive, i use the nitrous oxyde of whipped-cream chargers. By the way, never search for "Sahnespender" at google.


Salami: High efficency hydrocarbon based fuel ;)


Im using RockSim to simulate the flight stability of the rocket. The behaviour of the N20/ hybrid motor is simulated by an external model programmed in C++.

Overview of the rocket parts


All parts directly participating in the combustion would have to sustain at least 51 bar (vapor pressure of N20 at 20°C) but for reasons of safety i assume 200bar as the minimum.

  • Run Tank: A light-weight container for the oxydizer capable of sustaining enough pressure
  • Throttle Valve: A valve to allow precise regulation of the oxydizer flow from the run tank to the combustion chamber.
  • Injector: Aids in vaporizing the (still) liquid oxydizery.
  • Combustion Chamber: Where the oxydizer/fuel mix burns. Additionally to pressure (same amount as for the run tank) it has to sustain heat.
  • Nozzle: An opening that dramatically accelerates the hot gas escaping the combustion chamber.
  • Ignitor: Preheating the fuel and initializing combustion.
  • Body tube: Enhances airodynamic properties of the rocket and encapsulates the motor.
  • Motor mount: Anchors the motor within the body tube
  • Fins: Enhances airodynamic/stability properties of the rocket.
  • Recovery System (parachute): Enables slow decent after burn-out for safety and reusability
  • Tail camera: It's all about the nice view
  • Altimeter: Measurement concludes the fate of the cat
  • Electric beacon: Transmits a signal to ease finding the landing site.
  • Filling system: Pipework to fill the run tank with nitrous oxyde from whipped cream chargers.

Run Tank

Smart Parts C02 aluminium tank for paintball guns with on/off valve.

  • Capacity: 591ml (20 oz)
  • Connector: 1,27cm (1/2")
  • Max Pressure: 200bar

Throttle valve

An adjustable throttle valve ([1]) intended for use in hydraulics.

  • Connector: 1,27cm (1/2")
  • Flow rate: 45 l/min
  • Working pressure: 350 bar



  • Diameter: 54mm

Combustion Chamber

C02 aluminium tank for paintball guns without on/off valve.

  • Capacity: 255ml (9 oz)
  • Connector: 1,27cm (1/2")
  • Max Pressure: 200bar


SKR-54NZL graphite nozzle

  • Diameter: 54mm


None selected yet.

Body tube

Cardboard tube, intended for postal delivery.

  • Dimension: 1000 x 140 x 3 mm

Motor mount


Recover System

None specified/selected yet.