aus Metalab, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
This project is about building a 3D printer for rapid prototyping. In contrast to a milling machine the process is additive i.e. the workpiece is built-up layer by layer, usually from thermoplastic material. Some commercial devices exists - needless to say, they are pricey. The goal of a RepRap machine is the ability to print almost all parts it consists of, hence a self-replicating rapid prototyper.
After seing Vik's presentation about how to build a RepRap we've started our own implementation of a RepRap.
Then Bre Pettis came by in November 2007 and decided to build a McWire-based RepRap for Roboexotica. In a week.
Metalab inherited Bre's RepRap (yay!) and it's now used as a basis for our own RepRap.
Note: At the moment, what we're building is really a RepStrap.
Status (List of Milestones achieved )
- Most recent progress can be seen at the Metalab RepRap Soup
- Parts ordered from the RepRap Research Foundation for XYZ axis and extruder boards.
- XYZ axis is working.
- We can now also control our CNC machine from the RepRap software using a modified Arduino firmware and a CNC Arduino shield.
- First version of the extruder is resurrected from Bre's old parts and successfully extrudes HDPE.
- We can print handcoded objects using a quick and dirty Arduino firmware.
- GCode firmware is working! The GCode files are at the moment hand-coded.
- Knowledge Base for the GCode Toolchain accumulating here RepRap/GCode
- Next step is to establish a pipeline from design to printed parts. At the moment, we're thinking about doing this based on GCode.
- Full pipeline working, tuned parameters for solid objects. Going for replication :) --Wizard23 05:51, 16. Jul. 2008 (CEST)
- We need stepper motors for fixing our seedling. If anyone has an old printer or scanner lying around, we'll be happy to inherit it and salvage its precious guts.
- Switched to ABS. Moved extruder to the CNC for high speed and high precision printing.
- First functional part printed :)
- Applying for NetzNetz Grants
- Extruded Extruder is Extruding (first step towards self replication)
- Start using Z endstop for automatic positioning
- test lower temperatures/higher z spacing for using ABS as support structure
- unleash the creative potential of mankind
Materials in the Lab
- Two glasses CAPA/Polymorph -> went missing after the camp?
- A roll of HDPE
- All necessary boards, electronics and plastic parts for the RepRap and some spare parts