aus Metalab, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Wechseln zu: Navigation, Suche

Involvierte: Various Artists
Status: in progress
Beschreibung: Documentation of our Moderately Huge Screens
Zuletzt aktualisiert: 03.05.2014



Bildschirmseite vom Hersteller

äußere Schrauben sind M4, die vom VESA-Pattern sind M6


Touchglasplatte: 102.2x65.2x0.37cm


Mounting information:

  * An Air gap of 8mm or more will be required between the LCD panel and the touch sensor.
  * In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded.
  * Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables.
  * Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your in your unit.
  * Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap.
  * please note that 1mm of air is equal to 3mm of glass
  * It is important to allow for circulation of air in front of the LCD.

Original-Abstandshalter war ~11x11mm (vermutlich Acryl)