MHS: Unterschied zwischen den Versionen

aus Metalab, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Wechseln zu: Navigation, Suche
(initial page)
 
(Informationen++)
Zeile 6: Zeile 6:
 
}}
 
}}
 
TODO
 
TODO
 +
 +
= Monitor =
 +
 +
[http://www.necdisplay.com/p/large--screen-displays/lcd4215-r?type=support Bildschirmseite vom Hersteller]
 +
 +
äußere Schrauben sind M4, die vom VESA-Pattern sind M6
 +
 +
= Touchscreen =
 +
 +
Touchglasplatte: 102.2x65.2x0.37cm
 +
 +
[http://www.visualplanet.biz/get-interactive/driver-download.php Treiber]
 +
 +
Mounting information:
 +
 +
  * An Air gap of 8mm or more will be required between the LCD panel and the touch sensor.
 +
  * In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded.
 +
  * Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables.
 +
  * Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your in your unit.
 +
  * Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap.
 +
  * please note that 1mm of air is equal to 3mm of glass
 +
  * It is important to allow for circulation of air in front of the LCD.
 +
 +
Original-Abstandshalter war ~11x11mm (vermutlich Acryl)

Version vom 3. Mai 2014, 23:35 Uhr


MHS
No-Logo.png

Gestartet:

Involvierte:

Various Artists

Status:

in progress

Beschreibung:

Documentation of our Moderately Huge Screens

Zuletzt aktualisiert:

03.05.2014

TODO

Monitor

Bildschirmseite vom Hersteller

äußere Schrauben sind M4, die vom VESA-Pattern sind M6

Touchscreen

Touchglasplatte: 102.2x65.2x0.37cm

Treiber

Mounting information:

  * An Air gap of 8mm or more will be required between the LCD panel and the touch sensor.
  * In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded.
  * Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables.
  * Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your in your unit.
  * Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap.
  * please note that 1mm of air is equal to 3mm of glass
  * It is important to allow for circulation of air in front of the LCD.

Original-Abstandshalter war ~11x11mm (vermutlich Acryl)