MHS: Unterschied zwischen den Versionen

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
(logo)
K (used in)
Zeile 13: Zeile 13:
 
äußere Schrauben sind M4, die vom VESA-Pattern sind M6
 
äußere Schrauben sind M4, die vom VESA-Pattern sind M6
  
Serielle Schnittstelle kann als Fernsteuerung verwendet werden. Proof of concept in der [[Slackomatic]] funktioniert bereits (Power on/off). [http://au.nec.com/en_AU/media/docs/V321_External_Control_Codes.pdf-45ffa29b-0e64-4905-9f23-8db5cf982f0b-0.pdf PDF Doku vom Hersteller]
+
Serielle Schnittstelle kann als Fernsteuerung verwendet werden. Proof of concept in der [[Slackomatic]] funktioniert bereits (Power on/off). [http://au.nec.com/en_AU/media/docs/V321_External_Control_Codes.pdf-45ffa29b-0e64-4905-9f23-8db5cf982f0b-0.pdf PDF Doku vom Hersteller] (NEC)
  
 
= Touchscreen =
 
= Touchscreen =
Zeile 19: Zeile 19:
 
Touchglasplatte: 102.2x65.2x0.37cm
 
Touchglasplatte: 102.2x65.2x0.37cm
  
[http://www.visualplanet.biz/get-interactive/driver-download.php Treiber]
+
[http://www.visualplanet.biz/get-interactive/driver-download.php Treiber] (Visualplanet.biz)
  
 
Mounting information:
 
Mounting information:
Zeile 32: Zeile 32:
  
 
Original-Abstandshalter war ~11x11mm (vermutlich Acryl)
 
Original-Abstandshalter war ~11x11mm (vermutlich Acryl)
 +
 +
 +
= Currently Used In =
 +
 +
* Metalab Hauptraum Couchtisch (nur Monitor, noch nicht funktional)
 +
* Digitale Kunst Diplomausstellung (nur Monitor)
 +
* [http://imgur.com/a/5E5S3 Paradocks] (Monitor & Touchpanel)

Version vom 13. Juni 2014, 08:08 Uhr


MHS
MHS.png
Gestartet:
Involvierte: Various Artists
Status: in progress
Beschreibung: Documentation of our Moderately Huge Screens
Shutdownprozedur:
Zuletzt aktualisiert: 2014-06-13

TODO

Monitor

Bildschirmseite vom Hersteller

äußere Schrauben sind M4, die vom VESA-Pattern sind M6

Serielle Schnittstelle kann als Fernsteuerung verwendet werden. Proof of concept in der Slackomatic funktioniert bereits (Power on/off). PDF Doku vom Hersteller (NEC)

Touchscreen

Touchglasplatte: 102.2x65.2x0.37cm

Treiber (Visualplanet.biz)

Mounting information:

  • An Air gap of 8mm or more will be required between the LCD panel and the touch sensor.
  • In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded.
  • Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables.
  • Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your unit.
  • Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap.
  • please note that 1mm of air is equal to 3mm of glass
  • It is important to allow for circulation of air in front of the LCD.

Original-Abstandshalter war ~11x11mm (vermutlich Acryl)


Currently Used In

  • Metalab Hauptraum Couchtisch (nur Monitor, noch nicht funktional)
  • Digitale Kunst Diplomausstellung (nur Monitor)
  • Paradocks (Monitor & Touchpanel)