MHS: Unterschied zwischen den Versionen

aus Metalab, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Wechseln zu: Navigation, Suche
Zeile 1: Zeile 1:
|involved=Various Artists
|involved=Various Artists
|status=in progress
|status=in progress

Version vom 9. Mai 2014, 20:12 Uhr




Various Artists


in progress


Documentation of our Moderately Huge Screens

Zuletzt aktualisiert:




Bildschirmseite vom Hersteller

äußere Schrauben sind M4, die vom VESA-Pattern sind M6

Serielle Schnittstelle kann als Fernsteuerung verwendet werden. Proof of concept in der Slackomatic funktioniert bereits (Power on/off). PDF Doku vom Hersteller


Touchglasplatte: 102.2x65.2x0.37cm


Mounting information:

  • An Air gap of 8mm or more will be required between the LCD panel and the touch sensor.
  • In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded.
  • Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables.
  • Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your unit.
  • Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap.
  • please note that 1mm of air is equal to 3mm of glass
  • It is important to allow for circulation of air in front of the LCD.

Original-Abstandshalter war ~11x11mm (vermutlich Acryl)