Led Matrix: Unterschied zwischen den Versionen

aus Metalab, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Wechseln zu: Navigation, Suche
(status, linked to svns)
Zeile 22: Zeile 22:
 
* cliffords mplayer patch: http://svn.clifford.at/metaleds/
 
* cliffords mplayer patch: http://svn.clifford.at/metaleds/
  
 +
== Usage examples ==
 +
clifford/mplayer/mplayer-bin -vo metaleds:/dev/lp0 -framedrop -vf scale -zoom -x 72 -y 48 test.avi
 +
netcat -l -p 7000 > /dev/lp0
 +
 +
Format is: 0xC0 and then 72x48 bytes pixeldata (ranging from 0x00 to 0x0F)
  
 
== Specs ==
 
== Specs ==

Version vom 2. Mai 2008, 00:45 Uhr

Medien

hypnomatrix is hypnotizing
all hail to the hypnomatrix



For the LED Matrix we want to build on the CCCamp2007 we decided to design a GNU LEDMatrix Controller/Driver setup. It will consist of two parts the FPGA board and a several driver electronics boards. Now almost one year later we're still working on it :)

Status

Everything is soldered and it works. We can stream videos via the parallel interface of the via board to the matrix with 72fps :)

Usage examples

clifford/mplayer/mplayer-bin -vo metaleds:/dev/lp0 -framedrop -vf scale -zoom -x 72 -y 48 test.avi
netcat -l -p 7000 > /dev/lp0

Format is: 0xC0 and then 72x48 bytes pixeldata (ranging from 0x00 to 0x0F)

Specs

72x48 pixels totals 3456 blue leds 54 column driver modules (current source). 1 row driver mudule (current sink)

The 8 rows are each connected to a powermosfet and are driven to ground one at a time (so the matrix is 8times multiplexed). For driving the mosfets we use two Quad-mosfetdriver which in turn are controlled by a 8bit shifting register.

For the columns we take almost the same components except that we have to source current. The mosfets can source up to 250mA but we limit it to about 20mA.

Used ICs

  • NID5001N MOSFETS for the row driver
  • TC4467 used as column driver
  • 74HC595 shifting registers

New MiniITX Board

VIA EPIA-PD


ok .. i2c will not work because via i2c is actually SMBus running at 16khz :( .. but hey what about the OBVIOUS? there is a parallelport which should give us 8-10 mbit :)

linux stuff in the works