Geil-o-mat/X-Box

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Version vom 4. November 2013, 20:29 Uhr von Reox (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „You can control the CNC via a X-Box controller. Configuration was done like these websites suggested: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Simple_Remote_P…“)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Zur Navigation springenZur Suche springen

You can control the CNC via a X-Box controller.

Configuration was done like these websites suggested: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Simple_Remote_Pendant http://www.microcopters.de/artikel/emc2-game-controller-zur-manuellen-cnc-steuerung

Current Settings

Current Setting of the Controller

Note: you have to press X, A or B before you can jog in any direction and you need to hold it all the time. This will prevent unintentional movement (also the analog sticks are not very precise).

  • Analog Control (the further you push, the faster it will be)
    • Left Analog stick controls X and Y Axis
    • Right Analog stick controls Z Axis (up, down)
  • Digital Control (max speed with one push)
    • D-Pad controls X and Y Axis
    • Left and Right Button controls Z Axis
  • Jog Speed control:
    • X Button: 10mm/min
    • A Button: 100mm/min
    • B Button: 600mm/min

Free Buttons (RFU)

  • Y Button
  • Back Button
  • Start Button
  • Left Analog Switch
  • Right Analog Switch
  • Right Analog Stick Left, Right
  • Left Analog Stick Button press
  • Right Analog Stick Button press