Dome: Unterschied zwischen den Versionen

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
Zeile 137: Zeile 137:
 
=== TODO===
 
=== TODO===
 
* measure the sizes of the different triangles / create different inlays with mirors and out of acrylic
 
* measure the sizes of the different triangles / create different inlays with mirors and out of acrylic
* measure the top / center pentagon for replacement with solid wood  
+
*<s>  measure the top / center pentagon for replacement with solid wood </s> '''done'''
* add sprinklers for water
+
*<s>  add sprinklers for water</s> '''done'''
* add ventilator
+
*<s> add ventilator </s> '''done'''
 +
* <s> deign ledmounts</s> '''done'''
 
* add 100 leds
 
* add 100 leds
 
* make ledmounts
 
* make ledmounts

Version vom 27. Juli 2015, 13:02 Uhr

MIDDLE - LEFT - RIGHT (what a nice mantra)

the overview
Cut and drill.. 500 holes
Spraypaint
Some finished struts
Painting done
Construction
Done!
Cosy
Deconstruction (~10 minute with 5 guys)


Preparation

You need:

  • 250 bars (get 270+ to have some spareparts) the inner parts of slatted frames for beds work great
  • 91 M6 screws (length: 80 mm)
  • 91 Wing nuts
  • 182 Washers (the bigger the better)
  • Spray paint (RED,GREEN,BLUE,ORANGE)


Cut them in 5 different lengths.

Type Color Pcs. Length
A ORANGE 30 60cm
B RAINBOW 90 70cm
D GREEN 70 74.2cm
E BLUE 30 77cm
F RED 30 70.8cm

Drill a hole 2cm from the border in the middle of the struts ends.



Assembly

Start with 5 pcs type A struts (orange) Connect them like this: WASHER, SCREW, 5 BARS (A),WASHER,WING NUT, dont over tighten yet

You successfully put together the middle structure that will be on the center top of the dome.

Now from the end of these connect 5 type B struts. The magic formular is:


MIDDLE - LEFT - RIGHT


  • MIDDLE (A) outermost layer
  • LEFT (B) middle layer
  • RIGHT(B) innermost layer

and thats how you go on according to the diagram above.


This is true for the whole assembly.

Take a corner of a triangle, consider that "middle" and connect first left and then right to it.



Notes

There are 5 types of triangles:

Type Count MEASUREMENTS (center connectior -> center connector) MEASUREMENNTS FOR CUTOUT
AAB 35 60x60x70 52x52x62
BBB 35 70x70x70 62x62x62
BDF 65 70 x 74.2 x 70.8 61 x 66 x 63
DDE 25 74.2 x 74.2 x 77 66 x 66 x 69
EEE 5 77 x 77 x 77 69 x 69 x 69

Links

DOMERAMA online dome calculator

Many pix in soup


TODO

  • measure the sizes of the different triangles / create different inlays with mirors and out of acrylic
  • measure the top / center pentagon for replacement with solid wood done
  • add sprinklers for water done
  • add ventilator done
  • deign ledmounts done
  • add 100 leds
  • make ledmounts