Ctrl-Cut: Unterschied zwischen den Versionen

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
(Die Seite wurde neu angelegt: „= Ctrl-Cut = == WTF? == The Metalab has a nice and shiny Lazzzor from [http://epiloglaser.com Epilog]. Unfortunately, Epilog forces us to use their Microsof…“)
 
K
Zeile 1: Zeile 1:
= Ctrl-Cut =
 
 
 
== WTF? ==
 
== WTF? ==
  
Zeile 8: Zeile 6:
 
(There are also multiple other shortcomings of the Epilog drivers, which we will elaborate on later.)
 
(There are also multiple other shortcomings of the Epilog drivers, which we will elaborate on later.)
  
To remedy this, we are writing our own drivers, which will run on both Linux and Mac OS X (and any other system supporting [http://cups.org CUPS].
+
To remedy this, we are writing our own drivers, which will run on both Linux and Mac OS X (and any other system supporting [http://cups.org CUPS]).
  
 
== Sources ==
 
== Sources ==
  
Sources are here: [https://github.com/Metalab/ctrl-cut https://github.com/Metalab/ctrl-cut].
+
Sources are here: https://github.com/Metalab/ctrl-cut.
  
 
== Want to help? ==
 
== Want to help? ==
  
Talk to Amir or Marius - one of us might happen to have some braincycles allocated to this project.
+
Talk to [[User:Amir|Amir]] or [[User:MariusKintel|Marius]] - one of us might happen to have some braincycles allocated to this project.
 +
 
  
 
[[Kategorie:Lazzzor]]
 
[[Kategorie:Lazzzor]]
 
[[Kategorie:Projekte]]
 
[[Kategorie:Projekte]]

Version vom 16. Januar 2011, 18:40 Uhr

WTF?

The Metalab has a nice and shiny Lazzzor from Epilog. Unfortunately, Epilog forces us to use their Microsoft Windows-only laser cutter drivers. In addition, they only support Corel Draw as an application from which you can run jobs (other tools might work but are not supported).

(There are also multiple other shortcomings of the Epilog drivers, which we will elaborate on later.)

To remedy this, we are writing our own drivers, which will run on both Linux and Mac OS X (and any other system supporting CUPS).

Sources

Sources are here: https://github.com/Metalab/ctrl-cut.

Want to help?

Talk to Amir or Marius - one of us might happen to have some braincycles allocated to this project.